Tag Archives: screw supplier

China Good quality 37kw Industrial Oil Free Screw Air Compressor for Food Medical Industry Laser Cutting Engraving Welding Machine supplier

Product Description

HY(V)-Z Series Medium Voltage Permanent Magnet Variable Frequency Screw Air Compressor

01.Advanced Medium Voltage Dual Stage Mainframe
1. Two-stage integrated design, oil mist spray cooling is used between stages, which reduces the temperature of the air, and the compression process is close to the most energy-saving isothermal compression. In principle, two-stage compression saves 5%-8% of energy compared to single-machine compression ;
2. It is suitable for the compression ratio matching of medium voltage, the leakage in the main engine is small, and the volumetric efficiency is high;
3. The bearing adopts imported heavy-duty bearing, which makes the force of the rotor better; the two-stage rotors are HYiven by helical gears respectively, so that each stage of the rotor has the best linear speed;
4. The third-generation asymmetric rotor technology, the tooth surface is processed by the German KAPP rotor grinder, creating a high-precision rotor, which is the first guarantee for the high efficiency and stability of the host.

02.High efficiency permanent magnet synchronous motor
1. IP54 protection grade, which is more stable and reliable than IP23 in harsh environment;
2. Low temperature rise design, higher efficiency, and extended the service life of the motor;
3. Use ceramic plated bearings to completely eliminate the influence of shaft current on bearings;
4. It is made of rare earth permanent magnet materials, with large torque and small current during startup and operation;
5. With reasonable magnetic field design and magnetic density distribution, the working frequency range of energy-saving motors is wider and the operating noise is low;
6. Cooperating with the operation of the frequency converter, the frequency conversion soft start is realized, which avoids the strong mechanical impact of the machine and equipment when the motor is started at full pressure, and is conducive
to protecting the mechanical equipment, reducing equipment maintenance and improving the reliability of the equipment.

03.Special valve group
1. Intake valve: It adopts a special normally closed butterfly valve for medium voltage, with a non-return function, stable operation, high precision of air volume control, built-in noise reduction design, low cavitation noise and long service life;
2. Minimum pressure maintenance valve: special valve for medium voltage, high pressure resistance, high temperature resistance, accurate opening pressure, ensuring stable pressure in the barrel, ultra-fast return to seat, strong sealing, ensuring no backflow of gas, low pressure loss and high efficiency ;
3. Temperature control valve: The unit is equipped with a mixed-flow temperature control valve to ensure that the unit is more convenient to start in a low temperature environment, and to ensure the oil supply of the unit at any time; by controlling the oil supply temperature of the main engine to ensure that the unit is in the best performance state;
4. Oil cut-off valve: special normally closed valve for medium voltage, controlled by the exhaust pressure of the machine head. When starting up, the valve opens quickly to ensure that the compressor is lubricated and warmed up as soon as possible; when shutting down, the valve prevents oil from being ejected from the intake end.

04.Advanced and reliable electric control system
1. Large-size color LCD touch screen, with good man-machine communication interface, touch screen with anti-mistouch and sleep function;
2. It adopts double frequency conversion system, which is more energy-saving. The frequency converter and the motor are perfectly matched, and the low frequency and high torque can output 180% of the rated torque;
3. According to the characteristics of medium voltage, a special program is developed, with multiple pressure sensors and multiple temperature sensors, which can comprehensively detect the operating status of the unit, and automatically control the machine status without special care;
4. Configure the Internet of Things, you can check the operating status of the unit on the mobile phone;
5. Independent air duct design, suitable for various working conditions.

05.Silent centrifugal fan
1. Adopt centrifugal fan, brand-new separate radial cooling fan design, with special cooler, better cooling effect and more energy saving;
2. Compared with axial flow fans, centrifugal fans have higher wind pressure and lower noise;
3. Using variable frequency fan control, the oil temperature is constant, prolonging the service life of lubricating oil;
4. Due to the high wind pressure, the cooler and the filter are less likely to be blocked.

06.High quality triple filter

07.High quality and efficient coupling
1. The coupling is a torsional elastic coupling with a failure protection function, which can effectively damp and reduce the vibration and impact generated during operation;
2. The elastic body is only under pressure and can bear a larger load, and the drum-shaped teeth of the elastic body can avoid stress concentration.

Overall energy saving of products

Compared with power frequency air compressor, energy-saving variable frequency air compressor has practical significance.
1. The pressure control of the inverter air compressor is accurate. It can quickly respond to pressure changes, adjust the speed of the permanent magnet motor, control the pressure fluctuation range within 0.1bar, stabilize the pipe network pressure, provide the necessary air volume with the most reasonable power, and reduce excess energy consumption.
2. The variable frequency air compressor adopts the method of variable frequency starting, which eliminates the CHINAMFG current of the star-delta starting, and starts smoothly. Reduce the starting power, reduce the impact on the grid and equipment, and reduce equipment operating noise.
3. The frequency conversion control is more excellent than the ordinary throttling control. The adjustment range of the flow rate is larger, and with the high-efficiency permanent magnet motor, the energy saving effect is more significant at low percentage flow rate.
4. Most of the cost in the life cycle of the air compressor is generated by the electricity it consumes. The power consumption of the compressor is closely related to the air used on site. The inverter air compressor can not only ensure smooth and guaranteed production, but also save considerable electricity bills and achieve a CHINAMFG situation for the enterprise.

Energy consumptionMaintenance cost
Purchase cost
Energy consumption-Maintenance cost
Purchase cost energy conservation

Product application scenarios
Mining equipment: used for high-pressure blasting mining, HYiving all kinds of pneumatic machinery.

Baling machine: the air compressor is used in the pneumatic baling machine. After compressing the air, the piston of the cylinder is pressed down to HYive the vibrator to move quickly, so that the overlapping part of the packing belt has a hot-melt effect.

Product case

An oil field borders the CHINAMFG Sea in the East, the central ZheJiang Plain in the west, ZheJiang Province in the southeast, and the junction of ZheJiang and HangZhou in the north. It spans 25 districts, cities and counties in ZheJiang , HangZhou and ZheJiang provinces. The exploration and development construction began in January 1964, with a total exploration and development area of 18716 square meters. The oil headquarters is located in ZheJiang Xihu (West Lake) Dis. New Area, the key development and opening-up construction area of the national “Eleventh Five Year Plan”. It is 190 kilometers away from ZheJiang , 40 kilometers away from ZheZheJiang ngang and 70 kilometers away from ZheJiang International Airport. It has a superior geographical location, developed sea, land and air transportation and convenient traffic. It is an important part of the CHINAMFG rim economic circle. HY-45z from CHINAMFG company is mainly used for pipeline purging and gas supply.

Medium voltage direct-coupled screw compressor

HY-Z	Working pressure		Capacity		Power		NOise	Air outlet	Net weight
	bar	Psig	(m3/min)	cfm	kW	hp	dB	Pipe diameter
HY-18Z	20	291	1.7	61	18	25	65 ±3	G3/4″	868
	25	364	1.7	61	18	25	65 ±3	G3/4″	868
	30	437	1.7	61	18	25	65±3	G3/4″	868
HY-22Z	20	291	2.1	74	22	30	65±3	G3/4″	900
	25	364	2.1	74	22	30	65±3	G3/4″	900
	30	437	2.1	74	22	30	65 ±3	G3/4″	900
	35	510	1.6	57	22	30	65±3	G3/4″	900
	40	583	1.6	57	22	30	65±3	G3/4″	900
HY-37Z	20	291	3.3	117	37	50	65 ±3	G3/4″	1340
	25	364	3.3	117	37	50	65±3	G3/4″	1340
	30	437	3.3	117	37	50	65 ± 3	G3/4″	1340
	35	510	3.0	106	37	50	65 ± 3	G3/4″	1340
	40	583	3.0	106	37	50	65±3	G3/4″	1340
HY-55Z	20	291	6.4	225	55	75	67±3	DN32	2100
	25	364	5.0	176	55	75	67±3	DN32	2100
	30	437	4.7	165	55	75	67 ±3	DN32	2100
	35	510	4.3	151	55	75	67±3	DN32	2100
	40	583	3.8	133	55	75	67 ±3	DN32	2100
HY-75Z	20	291	7.2	255	75	100	68±3	DN32	2300
	25	364	7.0	248	75	100	68±3	DN32	2300
	30	437	6.7	237	75	100	68±3	DN32	2300
	35	510	6.3	223	75	100	68±3	DN32	2300
	40	583	5.7	201	75	100	68±3	DN32	2300
HY-90Z	20	291	12.0	423	90	120	70 ±3	DN32	2800
	25	364	10.3	364	90	120	70±3	DN32	2800
	30	437	10.0	353	90	120	70 ±3	DN32	2800
	35	510	6.3	223	90	120	70±3	DN32	2800
	40	583	5.8	205	90	120	70±3	DN32	2800
HY-110Z	20	291	13.7	483	110	150	72 ±3	DN40	3000
	25	364	12.5	440	110	150	72 ±3	DN40	3000
	30	437	10.3	363	110	150	72 ±3	DN40	3000
	35	510	9.6	339	110	150	72 ±3	DN40	3000
	40	583	9.1	321	110	150	72 ±3	DN40	3000
HY-132Z	20	291	16.3	576	132	175	74 ±3	DN50	3200
	25	364	13.5	476	132	175	74±3	DN50	3200
	30	437	12.2	430	132	175	74 ±3	DN50	3200
	35	510	11.8	416	132	175	74 ±3	DN50	3200
	40	583	11.3	398	132	175	74 ±3	DN50	3200
HY-160Z	20	291	20.0	706	160	215	75 ±3	DN50	3600
HY-160Z	25	364	16.1	567	160	215	75 ±3	DN50	3600
HY-185Z	20	291	23.5	829	185	250	76±3	DN50	3800
HY-185Z	25	364	18.5	652	185	250	76±3	DN50	3800
HY-200Z	20	291	26.0	918	200	270	76±3	DN50	4800
	25	364	22.9	809	200	270	76±3	DN50	4800
	30	437	22.2	783	200	270	76 ±3	DN50	4800
HY-200ZW	20	291	30.2	1067	220	300	78 ±3	DN65	5000
	25	364	25.8	911	220	300	78 ±3	DN65	5000
	30	437	23.2	819	220	300	78±3	DN65	5000
	35	510	22.0	776	220	300	78±3	DN65	5000
HY-250ZW	20	291	34.2	1207	250	350	78±3	DN65	5500
	25	364	29.1	1026	250	350	78 ±3	DN65	5500
	30	437	27.5	972	250	350	78±3	DN65	5500
	35	510	25.2	888	250	350	78±3	DN65	5500
	40	583	22.8	804	250	350	78±3	DN65	5500
HY-280ZW	20	291	37.7	1330	280	375	80±3	DN65	5800
	25	364	34.0	1200	280	375	80±3	DN65	5800
	30	437	30.0	1060	280	375	80±3	DN65	5800
	35	510	27.3	965	280	375	80±3	DN65	5800
	40	583	25.0	881	280	375	80±3	DN65	5800
HY-315ZW	30	437	33.7	1189	315	422	80±3	DN65	6400
	35	510	29.8	1053	315	422	80±3	DN65	6400
	40	583	27.1	958	315	422	80±3	DN65	6400

Huayan compressor product parameter table follows
1 The exhaust gas volume value is the gas volume flow rate in the following state (temperature: 32°C, atmospheric pressure: 101.325KPa)
2. Pressure value after exhaust pressure check valve
3. The noise value is the value in the anechoic chamber, test tolerance: 3dB(A)

Medium voltage permanent magnet variable frequency screw compressor

HY(V)-Z	Working pressure		Capacity		Power		Noise	Air outlet	Net weight
HY(V)-Z	bar	psig	(m3/min)	cfm	kW	hp	dB	Pipe diameter
HYV-55Z	20	291	3.8-6.4	134-226	55	75	67±3	DN32	2200
	25	364	3.6-6.0	127-212	55	75	67±3	DN32	2200
	30	437	3.1-5.2	109-184	55	75	67±3	DN32	2200
	35	510	2.6-4.3	92-152	55	75	67±3	DN32	2200
	40	583	2.3-3.8	81-134	55	75	67±3	DN32	2200
HYV-75Z	20	291	4.6-7.7	162-272	75	100	68±3	DN32	2400
	25	364	4.5-7.5	159-265	75	100	68±3	DN32	2400
	30	437	4.0-6.7	141-237	75	100	68±3	DN32	2400
	35	510	3.8-6.3	134-222	75	100	68±3	DN32	2400
	40	583	3.0-5.0	106-177	75	100	68±3	DN32	2400
HY-90Z	20	291	6.7-11.2	237-396	90	120	70±3	DN32	2800
	25	364	6.2-10.3	219-364	90	120	70±3	DN32	2800
	30	437	6.0-10.0	212-353	90	120	70±3	DN32	2800
	35	510	4.1-6.8	145-240	90	120	70±3	DN32	2800
	40	583	3.8-6.3	134-222	90	120	70±3	DN32	2800
HYV-110Z	20	291	8.2-13.6	290-480	110	150	72±3	DN40	3100
	25	364	7.5-12.5	265-441	110	150	72±3	DN40	3100
	30	437	6.5-10.8	230-381	110	150	72±3	DN40	3100
	35	510	5.8-9.6	205-339	110	150	72±3	DN40	3100
	40	583	5.5-9.1	194-321	110	150	72±3	DN40	3100
HYV-132Z	20	291	10.1-16.8	357-593	132	175	74±3	DN40	3300
	25	364	9.0-15.0	318-530	132	175	74±3	DN40	3300
	30	437	7.9-13.1	279-463	132	175	74±3	DN40	3300
	35	510	7.1-11.8	251-417	132	175	74±3	DN40	3300
	40	583	6.8-11.3	240-399	132	175	74±3	DN40	3300
HYV-160Z	20	291	9.6-16.0	339-565	160	215	75±3	DN50	3800
	25	364	10.0-16.6	353-586	160	215	75±3	DN50	3800
	30	437	9.8-16.3	346-576	160	215	75±3	DN40	3700
	35	510	9.4-15.6	332-551	160	215	75±3	DN50	3800
	40	583	8.3-13.8	293-487	160	215	75±3	DN40	3700
HYV-185Z	20	291	14.1-23.5	498-830	185	250	76±3	DN50	4000
HYV-185Z	25	364	11.7-19.5	413-689	185	250	76±3	DN50	4000
HYV-200Z	20	291	15.6-26.0	551-918	200	270	76±3	DN50	4200
	25	364	13.7-22.9	484-809	200	270	76±3	DN50	4200
	30	437	13.3-22.2	470-784	200	270	76±3	DN50	4200
HYV-220ZW	20	291	17.8-29.7	629-1049	220	300	78±3	DN65	5000
	25	364	15.5-25.8	547-911	220	300	78±3	DN65	5000
	30	437	13.9-23.2	491-819	220	300	78±3	DN65	5000
	35	510	13.2-22.0	565-777	220	300	78±3	DN65	5000
	40	583	12.2-20.3	431-717	220	300	78±3	DN65	5000
HYV-250ZW	20	291	20.5-34.2	724-1208	250	350	78±3	DN65	5700
	25	364	17.5-29.1	618-1571	250	350	78±3	DN65	5700
	30	437	16.5-27.5	583-971	250	350	78±3	DN65	5700
	35	510	15.1-25.2	533-890	250	350	78±3	DN65	5700
	40	583	13.7-22.8	484-805	250	350	78±3	DN65	5700
HYV-280ZW	20	291	22.6-37.7	798-1331	280	375	80±3	DN65	6000
	25	364	20.4-34.0	720-1201	280	375	80±3	DN65	6000
	30	437	18.0-30.0	636-1059	280	375	80±3	DN65	6000
	35	510	16.4-27.3	579-964	280	375	80±3	DN65	6000
	40	583	15.0-25.0	530-883	280	375	80±3	DN65	6500

4. Please consult our company for use in harsh working conditions such as high temperature, high humidity, high cold and high dust
5. Dimensions and weight of the whole machine are subject to change without prior notice
5. Please do not use compressed air directly for medical equipment inhaled by the human body

FAQ

Q1: What is the rotor speed for the air end?
A1: 2980rmp.

Q2: What’s your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)

Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).

Q4: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.

Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.

Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.

Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.

Q9: Do you have spare parts in stock?
A9: Yes, we do.

Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.

After-sales Service:	Provide After-Sell Sevice
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Movable Type

Customization:	Available \|

air compressor

How are air compressors utilized in the aerospace industry?

Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:

1. Aircraft Systems:

Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.

2. Ground Support Equipment:

Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.

3. Component Testing:

Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.

4. Airborne Systems:

In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.

5. Environmental Control Systems:

Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.

6. Engine Testing:

In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.

7. Oxygen Systems:

In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.

It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.

air compressor

What safety precautions should be taken when working with compressed air?

Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

1. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

2. Compressed Air Storage:

Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

3. Pressure Regulation:

Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

4. Air Hose Inspection:

Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

5. Air Blowguns:

Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

6. Air Tool Safety:

Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

7. Air Compressor Maintenance:

Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

8. Training and Education:

Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

9. Lockout/Tagout:

When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

10. Proper Ventilation:

Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

air compressor

What is the difference between a piston and rotary screw compressor?

Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:

1. Operating Principle:

Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.

China Good quality 37kw Industrial Oil Free Screw Air Compressor for Food Medical Industry Laser Cutting Engraving Welding Machine supplier
editor by CX 2023-11-08

China supplier 132kw Double Stage Pm Inverter Screw Type Air Compressor with Best Sales

Product Description

Compressor Features
132KW Double Stage PM inverter Screw Type Air Compressor

1. Double Screw with low noise, Super Silenced Enclosure
2. Elegant compact design. Fully open access door to inner
3. 100% Continuous duty operation. Load/ No Load operation
4. Machine was CE and UL certificated. Machines under ISO9001 quality management standard system
5. LCD control panel with easy use and read. PLC control for load/ no load and auto shut-off according to the air flow which save much energy
6. 1 year full machine warranty, 3years air end warranty.
7. Progressive Adaptive Control ( PAC ) Protection continuously monitors key operating parameters and adapts to prevent unexpected downtime
8. Sequential Cooling System, significantly improves efficency, serviceability improves efficiency, serviceability and noise level
9. V-Shield Technology, provides a totally integrated, leak-free design
10. CHINAMFG screw air compressor selling all over the world, we can supply different electricity
such as:

380V 50HZ 3PH
220V 60HZ 3PH
440V 60HZ 3PH
415V 50HZ 3PH
230V 60HZ 3PH
460V 60HZ 3PH

Company Information

about us…

Hongkong CHINAMFG Industry Limited was established in 2000, located in Chang’an town,

HangZhou city– “China National Machinery and Hardware town”

We’re a Hi-Tech company specialize in research, development, manufacture and

distribution of air compressor sparts. With our rich experience, profession technology

and rigorous quality control, our products are widely used in air compressor field

with good feedback and continuous orders from more than 2,000 customers in domestic

and oversea market.We can solve any technical problems you may encounter

with your air compressor and provide many kinds of air compressor parts for you.

Competitive price will be quoted for you, if you send us inquiry!

We are the best choice for you!

1.24 hours a day, 7 days a week
2.1-stop purchasing

3.Cheap, fast and efficient

4.adequate stocks
5.17 years experiences

6. Seriously quality control

7.Superb technique

No matter what you want, just send me your part number , favorable price will be quoted immediately.

our goal is to “provide the best products and services to our customers”
1.High Quality With Favorable Price
We ensure that the parts we offer are met your needs with high quality ,

For compressor After-sale Service

• Any questions or requests before, during or after sales, we would like to help you any time and will find you the best solution in 24 hours.

• Warranty: One year for the whole machine Genuine spare parts will be provided with best price.

• Over board engineer service is available.

Special Customized Service

1) Full OEM

• Quantity: at least 5 pcs

• In this plan, we will do all the changes (Color, name plate and logo) as your need, and will not charge extra fee.

2) Half OEM

• Quantity: no limit

• Under this program, we can make the necessary alteration (name plate and logo) but we will charge some extra fee for the name plate, as the name plate factory has the MOQ.

3) Logo OEM

• Quantity: no limit

• Only the logo will be changed to yours, and no extra fee will be charged.

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Stationary Type

Samples:	US$ 19056/Set 1 Set(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What is the role of air compressors in power generation?

Air compressors play a significant role in power generation, supporting various operations and equipment within the industry. Here are some key roles of air compressors in power generation:

1. Combustion Air Supply:

Air compressors are used to supply compressed air for the combustion process in power generation. In fossil fuel power plants, such as coal-fired or natural gas power plants, compressed air is required to deliver a steady flow of air to the burners. The compressed air helps in the efficient combustion of fuel, enhancing the overall performance and energy output of the power plant.

2. Instrumentation and Control:

Air compressors are utilized for instrumentation and control systems in power generation facilities. Compressed air is used to operate pneumatic control valves, actuators, and other pneumatic devices that regulate the flow of steam, water, and gases within the power plant. The reliable and precise control provided by compressed air ensures efficient and safe operation of various processes and equipment.

3. Cooling and Ventilation:

In power generation, air compressors are involved in cooling and ventilation applications. Compressed air is used to drive air-operated cooling fans and blowers, providing adequate airflow for cooling critical components such as generators, transformers, and power electronics. The compressed air also assists in maintaining proper ventilation in control rooms, substations, and other enclosed spaces, helping to dissipate heat and ensure a comfortable working environment.

4. Cleaning and Maintenance:

Air compressors are employed for cleaning and maintenance tasks in power generation facilities. Compressed air is utilized to blow away dust, dirt, and debris from equipment, machinery, and electrical panels. It helps in maintaining the cleanliness and optimal performance of various components, reducing the risk of equipment failure and improving overall reliability.

5. Pneumatic Tools and Equipment:

In power generation plants, air compressors provide the necessary compressed air for operating pneumatic tools and equipment. These tools include impact wrenches, pneumatic drills, grinders, and sandblasting equipment, which are utilized for installation, maintenance, and repair tasks. The high-pressure air generated by compressors enables efficient and reliable operation of these tools, enhancing productivity and reducing manual effort.

6. Nitrogen Generation:

Sometimes, air compressors are used in power generation for nitrogen generation. Compressed air is passed through a nitrogen generator system, which separates nitrogen from other components of air, producing a high-purity nitrogen gas stream. Nitrogen is commonly used in power plant applications, such as purging systems, blanketing in transformers, and generator cooling, due to its inert properties and low moisture content.

7. Start-up and Emergency Systems:

Air compressors are an integral part of start-up and emergency systems in power generation. Compressed air is utilized to power pneumatic starters for gas turbines, providing the initial rotation needed to start the turbine. In emergency situations, compressed air is also used to actuate emergency shutdown valves, safety systems, and fire suppression equipment, ensuring the safe operation and protection of the power plant.

Overall, air compressors contribute to the efficient and reliable operation of power generation facilities, supporting combustion processes, control systems, cooling, cleaning, and various other applications critical to the power generation industry.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China supplier 132kw Double Stage Pm Inverter Screw Type Air Compressor with Best Sales
editor by CX 2023-11-08

China manufacturer 220HP 160kw 6bar Double Stage Permanent Magnet Variable Frequency Screw Air Compressor supplier

Product Description

Detailed Photos

Product Parameters

Model	KAT-220PMD
Power(KW)	160Kw
Pressure(Bar)	7Bar
Volume flow(m3/min)	38.5m3/min
Pipe Diameter	DN100
Weight(kg)	4300KG
Dimension(mm)	3250×2100×2200mm

Certifications

Packaging & Shipping

Installation Instructions

Company Profile

ZheJiang Kingair Industrial Co., Ltd., is the core technology solution provider for compressed gas system solutions, with mature operation experience and excellent brand reputation in the 3 major areas : product system, core technology and solutions.

The company has strong comprehensive strength, the factory is located in Xihu (West Lake) Dis., ZheJiang , covers an area of 30000 square meters, has a strong equipment production capacity. In the course of 20 years of operation and development, we have always adhered to the enterprise spirit of “professionalism, innovation, energy saving and service”, deeply implemented the strategic policy of environmental protection and low carbon, and realized the construction of high intelligent and efficient air pressure system industry chain.

Kingair focuses on R&D, production and trade, and produces air compressor products with stable overall performance, advanced control system, superior, gas environment, reasonable design, higher efficiency and longer service life.

Each product of the company has passed the IS09000 quality management system certification, European CE, ISO certification, etc., and has established a complete set of mature foreign trade operation system. The products are popular in more than 80 countries and regions in Asia, Europe,Africa and America.

FAQ

Q1. Is KINGAIR trading company or manufacturer ?
A: We are professional manufacturer of screw air compressor, more than 20 years experience.

Q2. How long is KINGAIR delivery time ?
A: KINGAIR standard delivery time is 15 working days after confirmed order.For the other non-standard requirements will be discussed case by case.

Q3. How about your after-sales service?
A: 1. Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3. CHINAMFG agents and after service available arrange our engineers to help you training and installation.

Q4. What is the available voltage KINGAIR compressor?
A:KINGAIR available voltage include 380v/50hz/3p,400v/50hz/3p,415v/50hz/3p,220v/60hz/3p,440v/60hz/3p,And
KIGNAIR also supplies the required voltage.

Q5. Do you have any certificate ?
A: Yes, according to customer’s market need, we can offer CE certificate, ISO certificate, etc.

Q6. Do you offer OEM service ?
A: Yes, both OEM & ODM service can be accepted.

Q7. Can KINGAIR machines be run in high temperature environment?What is working temperature range?
A: Yes, KINGAIR machines would run in high temperature environment countries.Such as India, UAE,South Africa, Saudi Arabia, Iraq, Pakistan,etc.

After-sales Service:	on Line Technical Support
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

Samples:	US$ 28000/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

Are there special considerations for air compressor installations in remote areas?

Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

1. Power Source:

Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

2. Environmental Conditions:

Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

3. Accessibility and Transport:

Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

4. Maintenance and Service:

In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

5. Fuel and Lubricants:

For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

6. Noise and Environmental Impact:

Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

7. Communication and Remote Monitoring:

Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

How are air compressors used in refrigeration and HVAC systems?

Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:

1. Refrigerant Compression:

In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.

2. Refrigeration Cycle:

The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.

3. HVAC Cooling and Heating:

In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.

4. Air Conditioning:

Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.

5. Compressor Types:

Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.

6. Energy Efficiency:

Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.

By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.

2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.

3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.

4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.

5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.

It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.

Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.

China manufacturer 220HP 160kw 6bar Double Stage Permanent Magnet Variable Frequency Screw Air Compressor supplier
editor by CX 2023-11-07

China supplier Industrial 75kw 100HP Energy Saving 15% Rotary Screw Air Compressor air compressor for car

Product Description

High Quality Screw Air compressor

Our company specialize in making various kinds of compressors, such as:Diaphragm compressor,Piston compressor, screw Air compressor,Nitrogen generator,Oxygen generator ,Gas cylinder,etc. All products can be customized according to your parameters and other requirements.

The CHINAMFG is a volume -type gas compression machine with a volume of work volume. The compression of the gas is achieved by changes in volume, and the change of the volume is to achieve a rotation movement in the case with a pair of rotor of the compressor.
Basic structure of the screw air compressor: In the body of the compressor, a pair of intertwined spiral rotors are parallel. Usually, there is a rotor with convex teeth outside the ball, which is called yang rotor or yang screw. The rotor with concave teeth in the festival is called a pussy rotor or yin screw. Generally, the yang rotor is connected to the original motivation. Axial force. The cylindrical roller bearing at both ends of the rotor enables the rotor to achieve radial positioning and is underneath the radial force in the compressor. At both ends of the compressor body, a certain shape and size of the pores are opened respectively. One is used for inhalation, which is called the air intake; the other is used for exhaust, called the exhaust port.
Customized is accepted , Pls provide the following information to us :
1.Working Pressure : ____ Bar
2.Rated Power : _____ KW/HP

Do you really choose the right Screw compressor?

About Power Saving

1. The annual electricity bill for purchasing a 37KW ordinary screw air compressor is 37KWx24hx365 days x1. 2 (electric fee) xO. 6 (loading) Power consumption is as high as 233.3366 million! Power saving after switching to permanent magnet variable frequency screw air compressor: 23. 3366×30% save electric fee 7. 00.98 million!

Power

Minimum power saving (KW – h) 20%

Maximum power saving (KW – h) 40%

7.5KW

12000

24000

11KW

17600

35200

15KW

24000

48000

22KW

35200

70400

37KW

59200

118400

45KW

72000

144000

55KW

88000

176000

75KW

120000

240000

90KW

144000

288000

Advantages of screw air compressor :
01.Advanced Medium Voltage Dual Stage Mainframe
1. Two-stage integrated design, oil mist spray cooling is used between stages, which reduces the temperature of the air, and the compression process is close to the most energy-saving isothermal compression. In principle, two-stage compression saves 5%-8% of energy compared to single-machine compression ;
2. It is suitable for the compression ratio matching of medium voltage, the leakage in the main engine is small, and the volumetric efficiency is high;
3. The bearing adopts imported heavy-duty bearing, which makes the force of the rotor better; the two-stage rotors are driven by helical gears respectively, so that each stage of the rotor has the best linear speed;
4. The third-generation asymmetric rotor technology, the tooth surface is processed by the German KAPP rotor grinder, creating a high-precision rotor, which is the first guarantee for the high efficiency and stability of the host.
02.High efficiency permanent magnet synchronous motor
1. IP54 protection grade, which is more stable and reliable than IP23 in harsh environment;
2. Low temperature rise design, higher efficiency, and extended the service life of the motor;
3. Use ceramic plated bearings to completely eliminate the influence of shaft current on bearings;
4. It is made of rare earth permanent magnet materials, with large torque and small current during startup and operation;
5. With reasonable magnetic field design and magnetic density distribution, the working frequency range of energy-saving motors is wider and the operating noise is low;
6. Cooperating with the operation of the frequency converter, the frequency conversion soft start is realized, which avoids the strong mechanical impact of the machine and equipment when the motor is started at full pressure, and is conducive
to protecting the mechanical equipment, reducing equipment maintenance and improving the reliability of the equipment.
03. Special valve group
1. Intake valve: It adopts a special normally closed butterfly valve for medium voltage, with a non-return function, stable operation, high precision of air volume control, built-in noise reduction design, low cavitation noise and long service life;
2. Minimum pressure maintenance valve: special valve for medium voltage, high pressure resistance, high temperature resistance, accurate opening pressure, ensuring stable pressure in the barrel, ultra-fast return to seat, strong sealing, ensuring no backflow of gas, low pressure loss and high efficiency ;
3. Temperature control valve: The unit is equipped with a mixed-flow temperature control valve to ensure that the unit is more convenient to start in a low temperature environment, and to ensure the oil supply of the unit at any time; by controlling the oil supply temperature of the main engine to ensure that the unit is in the best performance state;
4. Oil cut-off valve: special normally closed valve for medium voltage, controlled by the exhaust pressure of the machine head. When starting up, the valve opens quickly to ensure that the compressor is lubricated and warmed up as soon as possible; when shutting down, the valve prevents oil from being ejected from the intake end.
4.Advanced and reliable electric control system
1. Large-size color LCD touch screen, with good man-machine communication interface, touch screen with anti-mistouch and sleep function;
2. It adopts double frequency conversion system, which is more energy-saving. The frequency converter and the motor are perfectly matched, and the low frequency and high torque can output 180% of the rated torque;
3. According to the characteristics of medium voltage, a special program is developed, with multiple pressure sensors and multiple temperature sensors, which can comprehensively detect the operating status of the unit, and automatically control the machine status without special care;
4. Configure the Internet of Things, you can check the operating status of the unit on the mobile phone;
5. Independent air duct design, suitable for various working conditions.
5.Silent centrifugal fan
1. Adopt centrifugal fan, brand-new separate radial cooling fan design, with special cooler, better cooling effect and more energy saving;
2. Compared with axial flow fans, centrifugal fans have higher wind pressure and lower noise;
3. Using variable frequency fan control, the oil temperature is constant, prolonging the service life of lubricating oil;
4. Due to the high wind pressure, the cooler and the filter are less likely to be blocked.
6..High quality triple filter

1. The filtration area of the air filter exceeds 150% of the normal requirement, the inlet pressure loss is low, and the energy efficiency is good;2. The oil filter adopts a full-flow built-in pressure-bearing oil filter suitable for medium voltage conditions. The rated processing capacity of the oil filter is 1.3 times the circulating oil volume. The imported filter material and the design scheme of large margin are selected, which has high filtration precision and good durability.
3. The oil is divided into special customized oil, which is designed and developed for medium-pressure working conditions, with wide applicable pressure range, good separation effect and low operating pressure loss; imported glass fiber material is selected;
4. The design of the 3 filter positions is reasonable, the maintenance is convenient, and the downtime is reduced.
High quality and efficient coupling
1. The coupling is a torsional elastic coupling with a failure protection function, which can effectively damp and reduce the vibration and impact generated during operation;
2. The elastic body is only under pressure and can bear a larger load, and the drum-shaped teeth of the elastic body can avoid stress concentration.
Main Parameter

Technical parameters of oil-free water-lubricated permanent magnet variable frequency screw compressor
HYW-G	Working pressure		Exhaust volume		Power		Noise	Air outlet pipe diameter	Net weight	Dimensions(mm)
Water lubricated series	bar	psig	(m3/min)	cfm	kW	hp	dB		kg	Length	Width	Height
HYWV-7G	7	102	0.7-1.2	24.7-42.4	7.5	10	58±3	G1″	500	1135	800	1000
	8	116	0.6-1.1	21.2-38.8	7.5	10	58±3	G1″	500	1135	800	1000
	10	145	0.5-0.9	17.7-31.8	7.5	10	58±3	G1″	500	1135	800	1000
HYWV-11G	7	102	1.0-1.6	35.3-56.5	11	15	58±3	G1″	500	1135	800	1000
	8	116	0.9-1.5	31.8-53	11	15	58±3	G1″	500	1135	800	1000
	10	145	0.7-1.3	24.7-45.9	11	15	58±3	G1″	500	1135	800	1000
HYWV-15G	7	102	1.1-2	38.8-71	15	20	60±3	G1″	550	1400	1000	1200
	8	116	1-1.9	35.4-67.3	15	20	60±3	G1″	550	1400	1000	1200
	10	145	/	/	15	20	60±3	G1″	550	1400	1000	1200
HYWV-15G	7	102	/	/	15	20	60±3	G1″	550	1170	900	1100
	8	116	/	/	15	20	60±3	G1″	550	1170	900	1100
	10	145	0.9-1.6	31.8-56.6	15	20	60±3	G1″	550	1170	900	1100
HYWV-18.5G	7	102	1.8-3.1	63.6-109.5	18.5	25	61 ±3	G1″	600	1400	1000	1200
	8	116	1.6-2.8	56.5-98.9	18.5	25	61 ±3	G1″	600	1400	1000	1200
	10	145	1.5-2.5	53-88.3	18.5	25	61±3	G1″	600	1400	1000	1200
HYWV-22G	7	102	2.2-3.7	77.7-130.7	22	30	61 ±3	G1″	655	1400	1000	1200
	8	116	2.0-3.4	70.6-120.1	22	30	61 ±3	G1″	655	1400	1000	1200
	10	145	1.8-3.0	63.6-105.9	22	30	61 ±3	G1″	655	1400	1000	1200
HYWV-30G	7	102	3.1-5.2	109.5-183.6	30	40	64±3	G11/2″	1150	1920	1170	1320
	8	116	2.8-4.7	98.9-166	30	40	64±3	G11/2″	1150	1920	1170	1320
	10	145	2.5-4.3	88.3-151.9	30	40	64±3	G11/2″	1150	1920	1170	1320
HYWV-37G	7	102	3.6-6.1	127.1-215.4	37	50	64±3	G11/2″	1200	1920	1170	1320
	8	116	3.3-5.6	116.5-197.8	37	50	64±3	G11/2″	1200	1920	1170	1320
	10	145	3.0-5.0	105.9-176.6	37	50	64±3	G11/2″	1200	1920	1170	1320
HYWV-45G	7	102	4.5-7.5	158.9-264.9	45	60	66±3	G11/2″	1320	1920	1170	1320
	8	116	4.0-6.8	141.3-240.1	45	60	66±3	G11/2″	1320	1920	1170	1320
	10	145	3.6-6.0	127.1-211.9	45	60	66±3	G11/2″	1320	1920	1170	1320
HYWV-55G	7	102	6.0-10.0	211.9-353.1	55	75	66±3	DN50	1520	1930	1320	1535
	8	116	5.4-9.0	191-317.8	55	75	66±3	DN50	1520	1930	1320	1535
	10	145	4.6-7.8	162.4-275.5	55	75	66±3	DN50	1520	1930	1320	1535
HYWV-75G	7	102	7.8-13.0	275.5-459.1	75	100	70±3	DN50	1620	1930	1320	1535
	8	116	7.2-12.0	254.3-423.8	75	100	70±3	DN50	1620	1930	1320	1535
	10	145	6.0-10.0	211.9-353.1	75	100	70±3	DN50	1620	1930	1320	1535
HYWV-90G	7	102	9.3-15.5	328.4-547.4	90	120	70±3	DN50	1800	1930	1320	1535
	8	116	8.4-14.0	296.6-494.4	90	120	70±3	DN50	1800	1930	1320	1535
	10	145	7.5-12.5	264.9-414	90	120	70±3	DN50	1800	1930	1320	1535
HYWV-110G	7	102	12.0-20.0	423.8-706.3	110	150	72±3	DN80	3100	2300	1600	1750
	8	116	10.8-18.0	381.4-635.7	110	150	72±3	DN80	3100	2300	1600	1750
	10	145	9.6-16.0	339-565	110	150	72±3	DN80	3100	2300	1600	1750
HYWV-132G	7	102	15.0-25.0	527.9-882.9	132	175	72±3	DN80	3250	2300	1600	1750
	8	116	13.8-23.0	487.3-812.2	132	175	72±3	DN80	3250	2300	1600	1750
	10	145	12.0-20.0	423.8-706.3	132	175	72±3	DN80	3250	2300	1600	1750
HYWV-160G	7	102	16.2-27.0	572.1-953.5	160	215	72±3	DN100	4500	2860	1600	1800
	8	116	15.3-25.5	540.3-900.5	160	215	72±3	DN100	4500	2860	1600	1800
	10	145	14.4-24.0	508.5-847.6	160	215	72±3	DN100	4500	2860	1600	1800
HYWV-185G	7	102	18.0-30.0	635.7-1059.4	185	250	74±3	DN100	4500	2860	1600	1800
	8	116	16.8-28.0	593.3-988.8	185	250	74±3	DN100	4500	2860	1600	1800
	10	145	15.0-25.0	529.7-882.9	185	250	74±3	DN100	4500	2860	1600	1800
HYWV-200G	7	102	21.6-36.0	762.8-1271.3	200	270	74±3	DN125	4800	3150	1850	2050
	8	116	19.8-33.0	699.2-1165.4	200	270	74±3	DN125	4800	3150	1850	2050
	10	145	16.2-27.0	572.1-953.5	200	270	74±3	DN125	4800	3150	1850	2050
HYWV-250G	7	102	25.8-43.0	911.1-1518.5	250	350	74±3	DN125	5200	3150	1850	2050
	8	116	24.6-41.0	868.7-1447.9	250	350	74±3	DN125	5200	3150	1850	2050
	10	145	22.8-38.0	805.2-1342	250	350	74±3	DN125	5200	3150	1850	2050

Factory Show

Packing & Delivery

Workshop of natural gas compressor
Our products
Our Certificate : CE and ISO certification
Our exhibition for the gas compressor
Our Service for diaphragm compressor :
1.Service time : 24*7 Hours
2.Customized Service
3.Perfect pre-sale,sale,after-sales service
4.FAT
5.Onsite commissioning Service
6.18 months warranty period

FAQ :
Q1.How about your after-sales service?
A: 1. Provide customers with intallation and commissioning online instructions.
2. Well-trained engineers available to overseas after-sales service.

Q2.What’s payment term?
A: T/T, L/C, D/P, Western Union, Trade Assurance and etc. Also we could accept USD, RMB, GBP, Euro and other currency.

Q3 : How long is your air compressor warranty?
A: Usually 1 year /12 Months for whole compressor machine, 2years/24months for air end (except maintenance spare parts.). And we can provide further warranty if necessary.

After-sales Service:	18 Months
Warranty:	18 Months
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

How are air compressors used in the food and beverage industry?

Air compressors play a vital role in the food and beverage industry, providing a reliable source of compressed air for various applications. Here are some common uses of air compressors in this industry:

1. Packaging and Filling:

Air compressors are extensively used in packaging and filling operations in the food and beverage industry. Compressed air is utilized to power pneumatic systems that control the movement and operation of packaging machinery, such as filling machines, capping machines, labeling equipment, and sealing devices. The precise and controlled delivery of compressed air ensures accurate and efficient packaging of products.

2. Cleaning and Sanitization:

Air compressors are employed for cleaning and sanitization purposes in food and beverage processing facilities. Compressed air is used to operate air-powered cleaning equipment, such as air blowguns, air-operated vacuum systems, and air knives. It helps remove debris, dust, and contaminants from production lines, equipment, and hard-to-reach areas. Additionally, compressed air is used for drying surfaces after cleaning and for applying sanitizing agents.

3. Cooling and Refrigeration:

In the food and beverage industry, air compressors are utilized in cooling and refrigeration systems. Compressed air is used to drive air compressors in refrigeration units, enabling the circulation of refrigerants and maintaining optimal temperatures for food storage and preservation. The controlled airflow provided by the compressors facilitates efficient cooling and refrigeration processes.

4. Aeration and Mixing:

Air compressors are used for aeration and mixing applications in the food and beverage industry. Compressed air is introduced into processes such as fermentation, dough mixing, and wastewater treatment. It helps in promoting oxygen transfer, enhancing microbial activity, and facilitating proper mixing of ingredients or substances, contributing to the desired quality and consistency of food and beverage products.

5. Pneumatic Conveying:

In food processing plants, air compressors are employed for pneumatic conveying systems. Compressed air is used to transport bulk materials such as grains, powders, and ingredients through pipes or tubes. It enables the gentle and efficient movement of materials without the need for mechanical conveyors, reducing the risk of product damage or contamination.

6. Quality Control and Testing:

Air compressors are utilized in quality control and testing processes within the food and beverage industry. Compressed air is used for leak testing of packaging materials, containers, and seals to ensure product integrity. It is also employed for spraying air or gases during sensory analysis and flavor testing.

7. Air Agitation:

In certain food and beverage production processes, air compressors are used for air agitation. Compressed air is introduced into tanks, mixing vessels, or fermentation tanks to create turbulence and promote mixing or chemical reactions. It aids in achieving consistent product quality and uniform distribution of ingredients or additives.

It is important to note that air compressors used in the food and beverage industry must meet strict hygiene and safety standards. They may require specific filtration systems, oil-free operation, and compliance with food safety regulations to prevent contamination or product spoilage.

By utilizing air compressors effectively, the food and beverage industry can benefit from improved productivity, enhanced product quality, and efficient processing operations.

air compressor

How are air compressors used in refrigeration and HVAC systems?

1. Refrigerant Compression:

2. Refrigeration Cycle:

3. HVAC Cooling and Heating:

4. Air Conditioning:

5. Compressor Types:

6. Energy Efficiency:

air compressor

What are the key components of an air compressor system?

An air compressor system consists of several key components that work together to generate and deliver compressed air. Here are the essential components:

1. Compressor Pump: The compressor pump is the heart of the air compressor system. It draws in ambient air and compresses it to a higher pressure. The pump can be reciprocating (piston-driven) or rotary (screw, vane, or scroll-driven) based on the compressor type.

2. Electric Motor or Engine: The electric motor or engine is responsible for driving the compressor pump. It provides the power necessary to operate the pump and compress the air. The motor or engine’s size and power rating depend on the compressor’s capacity and intended application.

3. Air Intake: The air intake is the opening or inlet through which ambient air enters the compressor system. It is equipped with filters to remove dust, debris, and contaminants from the incoming air, ensuring clean air supply and protecting the compressor components.

4. Compression Chamber: The compression chamber is where the actual compression of air takes place. In reciprocating compressors, it consists of cylinders, pistons, valves, and connecting rods. In rotary compressors, it comprises intermeshing screws, vanes, or scrolls that compress the air as they rotate.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air. It acts as a buffer, allowing for a steady supply of compressed air during peak demand periods and reducing pressure fluctuations. The tank also helps separate moisture from the compressed air, allowing it to condense and be drained out.

6. Pressure Relief Valve: The pressure relief valve is a safety device that protects the compressor system from over-pressurization. It automatically releases excess pressure if it exceeds a predetermined limit, preventing damage to the system and ensuring safe operation.

7. Pressure Switch: The pressure switch is an electrical component that controls the operation of the compressor motor. It monitors the pressure in the system and automatically starts or stops the motor based on pre-set pressure levels. This helps maintain the desired pressure range in the receiver tank.

8. Regulator: The regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications, ensuring a consistent and safe supply of compressed air.

9. Air Outlet and Distribution System: The air outlet is the point where the compressed air is delivered from the compressor system. It is connected to a distribution system comprising pipes, hoses, fittings, and valves that carry the compressed air to the desired application points or tools.

10. Filters, Dryers, and Lubricators: Depending on the application and air quality requirements, additional components such as filters, dryers, and lubricators may be included in the system. Filters remove contaminants, dryers remove moisture from the compressed air, and lubricators provide lubrication to pneumatic tools and equipment.

These are the key components of an air compressor system. Each component plays a crucial role in the generation, storage, and delivery of compressed air for various industrial, commercial, and personal applications.

China supplier Industrial 75kw 100HP Energy Saving 15% Rotary Screw Air Compressor air compressor for car
editor by CX 2023-10-30

China supplier Hg700-18c Diesel Mobile Screw Air Compressor Outdoor Using in Mining 18bar air compressor for car

Product Description

hot selling HongHangZhouan HG700-18C heavy duty 16bar diesel engine driven portable screw air compressor

These new high pressure machines, appearing the best effect of the impactor perfectly, have the characteristics of high
efficiency, high cost performance, meet the market’s constant pursuit of efficiency, and will bring new mining technology reform.
1. Large displacement and high air pressure
This machine also has the characteristics of large plastic discharge and high wind pressure, and can precisely and perfectly play the best HangZhou point of the impactor, so that customers will no longer worry about unstable flow and insufficient pressure in the use process.It is more capable of supporting 2 semi-hydraulic drilling RIGS in the way of one-tow two, which meets the market’s continuous pursuit of efficiency.
2. High reliability
The main zero that are used in the surrounding and outside of the CHINAMFG enterprise products, quality can be integrated. Constant pressure and stable flow;
Achieve continuous automatic regulation of displacement from 0 to 100%, highly efficient, energy-saving and stable; Economy, no pollution, low noise.
3. Comprehensive monitoring
The running state of the equipment can be fully monitored; According to the control panel in Chinese and English, the running state of the equipment is clear at a glance.
4. High-end configuration
Each part of the machine adopts high storage configuration to ensure the high reliability of the equipment.

Product Parameters

Detailed Photos

Packaging & Shipping

Company Profile

Certifications

FAQ

1. How long is your air compressor & drilling rig warranty?
∗ 1 years for the whole machine after leave the factory

2. Do you provide After- sales service parts?
∗Of course, we have.

3.How long could your machine be used?
∗More than 10 years if have regular maintenance.

4. How is your machine quality?
∗All the machines must pass the strict test before leave factory.
And our factory has above 20 years manufacturing experience,can gurantee the quality.

5.Which payment term you accpet?
∗Now we will accpet TT,LC,Western Union,Trade Assurance online,Paypal,Cash,etc.

6.How about the delivery time?
∗Within about 1 week.

7.Can visit your factory?
∗Yes,welcome to our factory. We will treat you in China,and pick you up at airport.
We are near to Xihu (West Lake) Dis. Airport.

8.Are you a manufacturer?
∗We are trade offcie in ZheJiang m,our factory is in ZHangZhoug.

After-sales Service:	1 Year
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Installation Type:	Movable Type

air compressor

Can air compressors be used for shipbuilding and maritime applications?

Air compressors are widely used in shipbuilding and maritime applications for a variety of tasks and operations. The maritime industry relies on compressed air for numerous essential functions. Here’s an overview of how air compressors are employed in shipbuilding and maritime applications:

1. Pneumatic Tools and Equipment:

Air compressors are extensively used to power pneumatic tools and equipment in shipbuilding and maritime operations. Pneumatic tools such as impact wrenches, drills, grinders, sanders, and chipping hammers require compressed air to function. The versatility and power provided by compressed air make it an ideal energy source for heavy-duty tasks, maintenance, and construction activities in shipyards and onboard vessels.

2. Painting and Surface Preparation:

Air compressors play a crucial role in painting and surface preparation during shipbuilding and maintenance. Compressed air is used to power air spray guns, sandblasting equipment, and other surface preparation tools. Compressed air provides the force necessary for efficient and uniform application of paints, coatings, and protective finishes, ensuring the durability and aesthetics of ship surfaces.

3. Pneumatic Actuation and Controls:

Air compressors are employed in pneumatic actuation and control systems onboard ships. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control propulsion systems, and manage various shipboard processes. Pneumatic control systems offer reliability and safety advantages in maritime applications.

4. Air Start Systems:

In large marine engines, air compressors are used in air start systems. Compressed air is utilized to initiate the combustion process in the engine cylinders. The compressed air is injected into the cylinders to turn the engine’s crankshaft, enabling the ignition of fuel and starting the engine. Air start systems are commonly found in ship propulsion systems and power generation plants onboard vessels.

5. Pneumatic Conveying and Material Handling:

In shipbuilding and maritime operations, compressed air is used for pneumatic conveying and material handling. Compressed air is utilized to transport bulk materials, such as cement, sand, and grain, through pipelines or hoses. Pneumatic conveying systems enable efficient and controlled transfer of materials, facilitating construction, cargo loading, and unloading processes.

6. Air Conditioning and Ventilation:

Air compressors are involved in air conditioning and ventilation systems onboard ships. Compressed air powers air conditioning units, ventilation fans, and blowers, ensuring proper air circulation, cooling, and temperature control in various ship compartments, cabins, and machinery spaces. Compressed air-driven systems contribute to the comfort, safety, and operational efficiency of maritime environments.

These are just a few examples of how air compressors are utilized in shipbuilding and maritime applications. Compressed air’s versatility, reliability, and convenience make it an indispensable energy source for various tasks and systems in the maritime industry.

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.

Air Pressure Regulation:

Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.

Air Volume and Flow:

Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.

Tool Actuation:

Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.

Versatility:

One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.

Portability:

Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.

Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

1. Air Demand: Determine the air demand requirements of your applications. Calculate the total CFM (Cubic Feet per Minute) needed by considering the air consumption of all the pneumatic tools and equipment that will be operated simultaneously. Choose an air compressor with a CFM rating that meets or exceeds this total demand.

2. Pressure Requirements: Consider the required operating pressure for your applications. Check the PSI (Pounds per Square Inch) rating of the tools and equipment you will be using. Ensure that the air compressor you choose can deliver the necessary pressure consistently.

3. Duty Cycle: Evaluate the duty cycle of the air compressor. The duty cycle represents the percentage of time the compressor can operate within a given time period without overheating or experiencing performance issues. If you require continuous or heavy-duty operation, choose a compressor with a higher duty cycle.

4. Power Source: Determine the available power source at your location. Air compressors can be powered by electricity or gasoline engines. Ensure that the chosen compressor matches the available power supply and consider factors such as voltage, phase, and fuel requirements.

5. Portability: Assess the portability requirements of your applications. If you need to move the air compressor frequently or use it in different locations, consider a portable or wheeled compressor that is easy to transport.

6. Space and Noise Constraints: Consider the available space for installation and the noise restrictions in your working environment. Choose an air compressor that fits within the allocated space and meets any noise regulations or requirements.

7. Future Expansion: Anticipate any potential future expansions or increases in air demand. If you expect your air demand to grow over time, it may be wise to choose a slightly larger compressor to accommodate future needs and avoid the need for premature replacement.

8. Budget: Consider your budgetary constraints. Compare the prices of different air compressor models while ensuring that the chosen compressor meets your specific requirements. Keep in mind that investing in a higher-quality compressor may result in better performance, durability, and long-term cost savings.

By considering these factors and evaluating your specific needs, you can choose the right size of air compressor that will meet your air demand, pressure requirements, and operational preferences, ultimately ensuring efficient and reliable performance.

China supplier Hg700-18c Diesel Mobile Screw Air Compressor Outdoor Using in Mining 18bar air compressor for car
editor by CX 2023-10-26

China supplier 15HP 11kw Direct Driven 16bar Portable Electric Industrial AC Power Screw Air Compressors for Fiber Laser Cutting Application air compressor repair near me

Product Description

Product Description

All in 1 solution
Rocky ALL IN ONE series compressed air system integrates screw air compressor, refrigerated air dryer, and air receiver tank into 1 assembly. This compact assembly provides a complete solution to produce clean and dry compressed air. Simplicity in just connecting an outlet pipe, drain pipe, and electrical cables to the system saves cost and space.

High-efficiency host, energy-saving and high-efficiency, low noise.
High-efficiency precision filter, high filtration precision, provide pure compressed air.
400L large-capacity gas storage tank, gas storage buffer.

Technical Parameters

Item Name	air compressor,air dryer,air tank,fine filter/OEM
Air Compressor Series	RMZY-15A
Air Delivery	1.05m3/min 37cfm
Minimum Order Quantity (MOQ)	1set
Material Details	1.You can choose ABB intelligent control. 2.PLC touch screen,0-100% stepless adjustment air inlet valve. 3.Rotorcomp/Hanbell/Baosi air end. 4.High efficiency motor for IP54/IP55/IP65 and insulution class F,ABB/siemens motor for choose.
Certification	ISO9001 CE TUV ASME
Quality Guarantee Period	1year
Voltage	110V – 660V 50Hz/60Hz 3ph,Support 1 machine for 2 voltages
Delivery Time	Shipped in 25 days after payment
Dimension(W×D×H mm)	18008501770mmmm
Transfer method	Direct drive, permanent magnet frequency conversion
Exhaust pressure dew point	2~10°C
Exhaust dust content	0.01um
Exhaust oil content	0.01ppm
Gas storage tank capacity	400L
Our service	1.No matter when or where,24 hours service for you 2.We have agents in many countries.If you need , we can provide you with technical support.

Model	Air Delivery (m3/min)	Rated exhaust pressure (Bar)	Power (kW)	Noise (Db)	Outlet diameter (In)	Dimension (mm)	Weight (Kg)	Exhaust pressure dew point (ºC)	Exhaust dust content (μm)	Exhaust oil content (ppm)	Gas storage tank capacity (L)



RMZY-15A	1.05	16	11/15	65	G3/4	18009001780	380	2~10	0.01	0.01	400

RMZY-20A	1.52	16	15/20	65	G3/4	18009001780	400	2~10	0.01	0.01	400

RMZY-30A	2.41	16	22/30	65	G3/4	180011001850	500	2~10	0.01	0.01	400

RMZY-30AA	2.41	16	22/30	65	G3/4	180011001850	620	2~10	0.01	0.01	400

RMZY-15AS	1.05	18-20	11/15	65	G3/4	18009001780	380	2~10	0.01	0.01	400

RMZY-20AS	1.52	18-20	15/20	68	G3/4	18008501770	400	2~10	0.01	0.01	400

RMZY-30AS	2.41	18-20	22/30	68	G3/4	18008701940	500	2~10	0.01	0.01	400

RMZY-30AAS	2.41	18-20	22/30	68	G3/4	22809002100	620	2~10	0.01	0.01	400

Certifications

Successful cases

Packaging & Shipping

Packaging & Shipping

1.Packing Details: Plywood crate pallet plus foam board and bubble film, Full closed wooden case. 1pcs/each package (for stationary screw air compressor)
2.Shipping method: by sea, by LCL/FCL or as requested
3.Delivery method: FOB, CFR, CIF and EXW etc.

Company Profile

ZheJiang CHINAMFG Machinery Co., Ltd. is a company dedicated to the production and research and development of various gas compression equipment. The company was established in 2012 and has a total of 5 licensed technical engineers. Mainly engaged in air, nitrogen, CO2 and other special gas compression equipment and after-treat equipment. With the development in recent years, the company has established a foreign trade team in ZheJiang , and hired foreign trade consultants with 10 years of industry experience to better serve customers worldwide. With excellent quality and the support of 30 distributors worldwide, our annual sales in 2018 exceeded 5 million US dollars. We look CHINAMFG to working with you to create a better tomorrow!

Exhibitions

After Sales Service

1. 24/7 after sales service support in different languages.
2. Customized color, Model ect.
3. Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center.
4. Delivery on time and excellent after-sales service.
5. Plenty of original spare parts with proven quality.
6. All kinds of technical documents in different languages.

FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of HangZhou,ZheJiang ,China. More than 18 years of experience in air compressor manufacturing.

Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.

Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.CHINAMFG agents and after service avaiable.arrange our engineers to help you training and installation.

Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.

Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.

Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
2. Some key parts are imported from overseas
3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.

Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.

Q10.How long could your air compressor be used?
A: Generally, more than 10 years.

After-sales Service:	Online Support
Warranty:	24month
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

How are air compressors employed in the mining industry?

Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:

1. Exploration and Drilling:

Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.

2. Ventilation and Air Quality Control:

Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.

3. Material Conveyance:

In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.

4. Dust Suppression:

Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.

5. Instrumentation and Control:

Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.

6. Explosive Applications:

In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.

7. Maintenance and Repair:

Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.

It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.

By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.

air compressor

What is the difference between a piston and rotary screw compressor?

1. Operating Principle:

Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

China supplier 15HP 11kw Direct Driven 16bar Portable Electric Industrial AC Power Screw Air Compressors for Fiber Laser Cutting Application air compressor repair near me
editor by CX 2023-10-25

China best Hf15/13 (H) Industrial Permanent Magnet Stationary Screw Air Compressor supplier

Product Description

Product Description

Application

Hanfa group through the continuous pursuit of technological innovation, to meet the needs of market development, in the original mobile screw air compressor series is developed on the basis of smaller size, the layout more reasonable, more cost-effective new mobile screw series. Comprehensive performance is good, the more efficient is widely used in drilling, pipeline pressure test and related fields.For cold area can also be optional liquid fuel oil heater, through the pulmonary circulation cooling heating cylinder diesel engine, thus allowing you to start.

Features

1.High reliability

All the main parts and components are made by CHINAMFG enterprises at home and abroad with reliable quality. Pressure, force constant, flow stable; Realize the displacement from 0 to 100% T continued from section II, high efficiency, energy saving, stable and reliable;

2.Convenience

Small volume, light weight, low noise;Compact, easy to transport, covers an area of less, also can enter in narrow condition, out freely, reduce transportation costs.All the door design, ensure the wide operation space, convenient maintenance and repair. To save time, improve efficiency.

3.To adapt to the environment

This air compressor to ensure that the cold temperature, oxygen condition can also be a perfect start, satisfy the bearing and all kinds of bad working condition of using the environment. For customers to solve the has the worry, greatly improve the work efficiency.

4.Comprehensive monitoring

Equipment running state can be comprehensive monitoring;Control panel, in both Chinese and English interface is concise, clear, equipment running status be clear at a glance, the operation is convenient, and equipped with automatic stop function with regard to the guarantee the safety of person, machine.
Technical Data

name		HF12/13(H)	HF15/13(H)
compressor	Displacement	12(m/min)	15(m/min)
	Exhaust pressure	13(bar)	13(bar)
	Compression level	Single-stage	Single-stage
	Gas tank volume	120(bar)	130(bar)
	Screw oil quantity	60(l)	65(l)
diesel engine	Engine manufacturer
	engine model	6BTA5.9-C180	6BTA5.9-C180
	Number of cylinders	6	6
	rated power	132(kw)	132(kw)
	Rated speed	2200(rpm)	2200(rpm)
	Idling speed	1400(rpm)	1400(rpm)
	Diesel engine lubricants	18(l)	18(l)
	Coolant volume	40(l)	40(l)
	Fuel tank volume	335(l)	335(l)
unit	Battery	6-QW-135MF*2	6-QW-135MF*2
	Connection size	1-G2″,1-G1″,	1-G2″,1-G1″,
	transfer method	Coupling direct coupling	Coupling direct coupling
	long	4200(mm)	4200(mm)
	width	1980(mm)	1980(mm)
	high	2210(mm)	2210(mm)
	Total Weight	2700(kg)	2700(kg)
	Unit walking mode	Two rounds of movement	Two rounds of movement

Working Site
Company Introduction
Hanfa Group established in 1998 is a key enterprise in the industry of geological exploration and water well field, with the ability to research,manufacture and market. Now, the Group pursues high standard manufacturing and qualified products. It has more than 20 species such as water well drilling rig, core drilling rig, engineering drilling rig, DTH drilling rig, horizontaldirectional drilling rig, etc. These machines are mainly used in geological prospecting, exploration of railway and highway engineering, mining, SPT, water well, geothermal well etc. Some of them won the Scientific and Technical Advance Prize or the National Scientific Research Achievement Prize. All the products have passed the quality system certification of ISO9001:2000 and are national inspection-free products.

1. More than 30 years of experience

The factory is located in ZheJiang Province, China. We are very welcome to visit our factory. If
you need it, we will arrange a pick-up.
2.Top production team
The transportation and packaging will be packaged in international standards. If you have special packaging requirements, we will give you the most suitable solution.
3.Our Service
– New machine provides technical trair.
– Once anything goes wrong with the machine by normal using, our technical person must appear at the first time no matter where you are.
– When the machine should be maintained, you will receive the reminding from us.
– According to different geological conditions, we will recommend different construction plans for you
– Remind you which are wearing parts, so you can prepare enough.
– 24 hours respond to your quality problem.

FAQ
1,Are you trading company or manufacturer?

We are professional manufacturer, and our factory mainly produce water well drilling rig, core drilling rig, DTH drilling rig, piling rig, etc. Our products have been exported to more than 50 countries of Asia, South America, Africa, and get a good reputation in the world.

2,Are your products qualified?
Yes, our products all have gained ISO certificate,and we have specialized quality inspection department for checking every machine before leaving our factory.

3,How about your machine quality?
All of our machines hold the ISO, QC and TUV certificate, and each set of machine must pass a great number of strict testing in order to offer the best quality to our customers.

4,Do you have after service?
Yes, we have special service team which will offer you professional guidance. If you need, we can send our engineer to your worksite and provid the training for your staff.

5,What about the qaulity warranty?
We offer one-year quality warranty for machines’ main body.

6,How long can you deliver the machine?
Generally, we can deliver the machine in 7 days.

Our Customers

Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Open Type
Installation Type:	Movable Type

Samples:	US$ 20000/Set 1 Set(Min.Order) \| Request Sample

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Air Pressure Regulation:

Air Volume and Flow:

Tool Actuation:

Versatility:

Portability:

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

China best Hf15/13 (H) Industrial Permanent Magnet Stationary Screw Air Compressor supplier
editor by CX 2023-10-21

China supplier 30 Bar Portable Diesel Two Stage Screw Air Compressor for Mining with One Stop Package Service air compressor lowes

Product Description

30 bar portable diesel 2 stage screw air compressor for mining with 1 stop package service

Product Description

1. From customers’ feedback, CHINAMFG air compressor is the most cost-effective brand, with stable quality and competitive price, acceptable by most customers.
2. The air displacement is 6%-10% bigger than other brand, so the drilling speed is more quick, also more stable when drilling hard rock.
3. To be honest, after 1-2 years using, the head temperature will be easily rise, so when the outdoor temperature more than 30 Degrees Celsius,it will stop work, but the CHINAMFG brand without this problem, that also is the main reason we choose it.
4. For the CHINAMFG brand, their air compressor not only used for drilling machine, also for mining machine, also is the first manufacturer that can produce the high-pressure air compressor in China.

Besides the CHINAMFG brand air compressor, we can also provide Kaishan, HongHangZhouan, Sullair, Liutech, CHINAMFG brand.

Mian Technical Machine

Model	Rated FAD	Rated Pressure	Weight	Dimension
S60T	18 m3/min	18 bar	3055 kg	322016702150 mm
S85T	24 m3/min	22 bar	3450 kg	356018302100 mm
S95T	29 m3/min	24 bar	4300 kg	395020002550 mm
S98T	30 m3/min	24 bar	4350 kg	395020002550 mm
S100T	31 m3/min	25 bar	4350 kg	395020002550 mm
S125D	36 m3/min	30 bar	5500 kg	422020002300 mm

Application
Air compressor is commonly used in water well drilling, rock drilling, mine drilling areas and so on. Air compressor is the main body to provide air source power for percussive water well drilling rig, provide certain air volume and pressure for DTH drilling rig.

Product Photo


S60T	S95T

S100T	S125D

Product Show

Product Detail

PRODUCT ADVANTAGES
According to your local market needs and budget, we can design the right machine for you.


Air-end Professional customized 2 stage screw air-end. Lower energy consumption, longer life. Lower maintenance cost.	Controller Clear view of parameters display and indicator lights.With data diagnostic functions and alarm indicators,safe & reliable.

Full opening doors on both left & right side Larger operating space.Easy service access and high efficiency for time saving.Used oil or coolant drained from centralized chassis point for environment protection.Reinforced heavy duty & durable undercarriage design.	International Famous brand diesel engine Top of the line manufacturing process,reliable & durable.More powerful engine with fuel adaptability.More powerful and better responding in lower speed.Integrated design with less failure rate and for easy maintenance.

Mass Production

We can provide custom rebar bending machines according to customer requirements such as work capacity, weight, shape, color, voltage, etc.
Currently, we has advanced production technology and advanced product testing equipment, scientific and sound corporate management, and strictly operates in accordance with the ISO/TS9001:2008 international quality standard management system, strict quality clearance, and provides customers with qualified products.In the past 10 years, our products have been sold to 39 countries and regions.With the accumulation of customers, our export volume is growing at an average annual rate of 36%.

Our Partenres

Trust us, join us and give you the best experience.

GOOD REVIEWS
Even in the current situation, many customers are unable to visit our factory, but there are still many partners who choose to trust us, and the praise of customers recognizes our strength.

Packing

FAQ

Q1: – Can i request customize service?
A: Yes, dear sir, we can also customize voltage, material, colour, nameplate etc., and meet your other special request.
Q2: – What is the advantage of your factory?
A: Here we’re your “Chinese Partner”, accurate market sharing, reliable investment suggestion, select right machine, quick problem solver, reliable after-sales service, minimize purchasing risk.
Q3: – What service do you supply after order?
A: Your order will be fully tracked including production, professional quality control, strong logistics teamwork working and experienced customs documents preparation, you can get One-stop service from us.
Q4: – How to solve the after-sales problem?
A: You can send us a video or pictures to explain the problem, later we can give you a solution to solve it, if it is our responsibility, we will 100% in charge of it and try our best to make you satisfied, we pursue long term cooperation always.

After-sales Service:	Online
Warranty:	1 Year
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How are air compressors utilized in the aerospace industry?

1. Aircraft Systems:

2. Ground Support Equipment:

3. Component Testing:

4. Airborne Systems:

5. Environmental Control Systems:

6. Engine Testing:

7. Oxygen Systems:

air compressor

Can air compressors be used for inflating tires and sporting equipment?

Yes, air compressors can be used for inflating tires and sporting equipment, providing a convenient and efficient method for achieving the desired air pressure. Here’s how air compressors are used for these purposes:

1. Tire Inflation:

Air compressors are commonly used for inflating vehicle tires, including car tires, motorcycle tires, bicycle tires, and even larger truck or trailer tires. Air compressors provide a continuous source of pressurized air, allowing for quick and accurate inflation. They are often used in automotive repair shops, gas stations, and by individuals who regularly need to inflate tires.

2. Sporting Equipment Inflation:

Air compressors are also useful for inflating various types of sporting equipment. This includes inflatable balls such as soccer balls, basketballs, footballs, and volleyballs. Additionally, air compressors can be used to inflate inflatable water toys, air mattresses, inflatable kayaks, and other recreational items that require air for proper inflation.

3. Air Tools for Inflation:

Air compressors can power air tools specifically designed for inflation purposes. These tools, known as inflators or air blow guns, provide controlled airflow for inflating tires and sporting equipment. They often have built-in pressure gauges and nozzles designed to fit different types of valves, making them versatile and suitable for various inflation tasks.

4. Adjustable Pressure:

One advantage of using air compressors for inflation is the ability to adjust the pressure. Most air compressors allow users to set the desired pressure level using a pressure regulator or control knob. This feature ensures that tires and sporting equipment are inflated to the recommended pressure, promoting optimal performance and safety.

5. Efficiency and Speed:

Air compressors provide a faster and more efficient inflation method compared to manual pumps. The continuous supply of compressed air allows for quick inflation, reducing the time and effort required to inflate tires and sporting equipment manually.

6. Portable Air Compressors:

For inflating tires and sporting equipment on the go, portable air compressors are available. These compact and lightweight compressors can be easily carried in vehicles or taken to sports events and outdoor activities, ensuring convenient access to a reliable air supply.

It is important to note that when using air compressors for inflating tires, it is recommended to follow manufacturer guidelines and proper inflation techniques to ensure safety and avoid overinflation.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

China supplier 30 Bar Portable Diesel Two Stage Screw Air Compressor for Mining with One Stop Package Service air compressor lowes
editor by CX 2023-10-21

China supplier 191kw 18bar 13bar Dual Duty Diesel Mobile Screw Type 2stage Compression Air Compressor for Mining best air compressor

Product Description

Diesel mobile screw air compressor

This series of products pay more attention to the structural layout of products and the application of innovative technologies while improving the strength of the machine body. The self-developed cooler is equipped with fans with corresponding speed ratio, which can ignore all the high temperature weather. Diesel engines operating at economic speeds can improve fuel economy while operating at low noise. The double-door design greatly solves the trouble of inconvenient replacement of filter element during maintenance.

TECHNICAL SPECIFICATIONS
Type	Screw Air Compressor
Item	18/18(22/13) Dual duty
Rated FAD	18/22 m³/min
Rate Pressure	18/13 bar
Diesel Brand	Yuchai Diesel
Engine Power	191KW
Compression stage	2 Stage
Whole Machine walking mode	4 wheels
Dimensions (LWH)	320020002600 mm
Weight	3700KG

Detailed Photos

Packaging & Shipping

Company Profile

FAQ

Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.

Q2: What the exactly address of your factory?
A2: Our company is located in Kaixuan Road ,Economic Zone HangZhou, ZHangZhoug, China

Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: What about the voltage of products? Can they be customized?
A5: Yes, of course. The voltage can be customized according to your equirement.

Q6: Which payment term can you accept?
A6: 30% T/T in advanced, 70% T/T against the B/L copy.

After-sales Service:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Oil Cooling
Power Source:	Diesel Engine
Cylinder Position:	Angular
Structure Type:	Closed Type

Customization:	Available \|

air compressor

What are the advantages of using rotary vane compressors?

Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:

1. Compact and Lightweight:

Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.

2. High Efficiency:

Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.

3. Quiet Operation:

Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.

4. Oil Lubrication:

Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.

5. Versatile Applications:

Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.

6. Easy Maintenance:

Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

air compressor

What safety precautions should be taken when working with compressed air?

1. Personal Protective Equipment (PPE):

2. Compressed Air Storage:

3. Pressure Regulation:

4. Air Hose Inspection:

Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

5. Air Blowguns:

6. Air Tool Safety:

7. Air Compressor Maintenance:

8. Training and Education:

9. Lockout/Tagout:

10. Proper Ventilation:

By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

air compressor

What is the difference between a piston and rotary screw compressor?

1. Operating Principle:

Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

China supplier 191kw 18bar 13bar Dual Duty Diesel Mobile Screw Type 2stage Compression Air Compressor for Mining best air compressor
editor by CX 2023-10-18

China supplier Underground Coal Mine Explosion-Proof Portable CHINAMFG / Anti-Explosive Portable Screw Air Compressor air compressor parts

Product Description

Product Description
Everyone is very concerned about the development trend of the water well drilling machine Drilling operation is an important process in the process of taking the water. Generally common types include rotary rigs, shock drills, and composite rigs. They have certain requirements for different geological characteristics, so they have certain requirements for the drill drill motivation.
A variety of screw air compressors just solve this problem. With strong motivation, the well drilling rigns can calmly cope with various complex geology, bringing users a highly efficient and economical experience.

Product feature

1. More strong and more energy -saving new air compressor host

Two -level compression, the latest patent screw rotor, higher efficiency; the level of energy efficiency is 10%higher than similar products, more energy saving; heavy high -intensity design, high -quality CHINAMFG bear 40BAR design, the optimal air compressor structure and reliability.

2. High -quality heavy -duty diesel engine

High -efficiency Edao high -voltage co -track fuel system; supporting heavy diesel engines such as Conominus and Weichai; the intelligent control system accurately controls the fuel injection volume to achieve the best power output within the scope of the entire transport; stronger power, higher reliability , Better fuel economy; meet the requirements of the 3 emissions of the country.

3. Intelligent control system

Display the interface intuitive, multi-language intelligent controller, simple operation;
Real -time display speed, gas supply pressure, oil pressure, exhaust temperature, coolant. Temperature, fuel liquid level and other operating parameters
It has self -diagnosis faults, alarm and stopping protection functions to ensure the safe operation of unattended time; optional remote monitoring systems and mobile phone APP functions.

4. Efficient cooling system

High -efficiency and reliable system configuration to ensure that the whole machine is in the best operating state; independent oil, gas, liquid cooler, large diameter high -efficiency fan, smooth air passage; adapting to the climate of the severe cold, hot summer, and the extreme environment of the plateau.

5. Large capacity heavy load air filtration system and oil and gas separation system

Whirlwind high -quality heavy load main air filter, dual filtration, filtering off the dust and other debris particles in the air, ensuring the minimum loss of diesel and air compressor hosts in bad operating conditions, extending the life of the machine;
Adapt to the dedicated efficient oil and gas separation systems that have changed the operating conditions such as drilling machines and well drilling to ensure that the air quality of the air and gas after the separation of oil and gas under various types of working conditions meets the requirements of 3PPM, and extend the cycle of the use of oil core.

6. High -quality and reliable air compressor coolant and lubrication system

Under low and high temperature environment, the stability of the liquid chemical ingredients and physical characteristics of the cooling and high temperature environment is good, and the coordinates are not deteriorated.
Multi -oil filter design and constant temperature control can ensure the minimum loss under bad working conditions and extend the life of the machine.

7. Rich customized options

Optional 2 -industrial air compressor host and control system to meet the efficient construction of various operations;
The optional low -temperature starting system, the fuel coolant heater makes the temperature of the diesel engine coolant, lubricating oil, and the temperature of the whole machine continuously improved to ensure the start of the diesel engine in severe cold and plateau environment;
Optional cooler to ensure that the exhaust temperature is not higher than the ambient temperature by 15 ° C; the optional air pre -filter can ensure that the diesel engine and the air compressor in the high dust environment are far from early wear;
The optional remote monitoring system and mobile app function, management becomes easy.

8.Higher income and easier and easy maintenance

A variety of innovative designs can effectively reduce the cost of customer use and greatly improve work efficiency. Increase return on investment;
The mute hood and the full -closed chassis shock -absorbing and silencer design, running smoothly, and lower noise; spacious full open door panel, reasonable structure layout, making the maintenance air filter, oil filter oil core easy;
The peripheral layout of the components that needs to be maintained and maintenance is reasonable, the tentacles are available, and the pipeline cables are clear and convenient to shorten the time and costs of the maintenance.

Product specifications series parameters

Model		HGS650-18W	HGS8502-22W
Compressor	Engine displacement (m/min)	18	24/20
	Discharge pressure(bar)	18	16/22
	Compression Grade	Grade 1	Grade 2
	Volume of storage tank(L)	130	130
	Volume of screw oil(L)	80	90
Dieengine	Engine manufacturer	Weichai	Weichai
	Engine model	WP6G240E330	WP7G300E300
	Number of cylinders	6 cylinders	6 cylinders
	Rated power(kw)	176	220
	rated speed(rpm)	2000	2000
	Air rotation speed(rpm)	1400	1400
	Diesel engine (lubricating) oil(L)	24	28
	Coolant volume(L)	60	70
	Fuel tank capcity (L)	270	300
Unit	Battery	6-QW-165MFX2	6-QW-165MFX2
	Connection size	1-G2″1-G1″	1-G2″1-G1″
	Emission Standard	National 3	Diect connection
	Length(mm)	3400	3650
	Width(mm)	1780	1900
	Height(mm)	2000	2100
	Total weight(kg)	3200	4200
	Operation moving way	Fixed	Fixed

Model		HGS980-24C	HGS1100-2–25Y
Compressor	Engine displacement (m/min)	29/25	30/25
	Discharge pressure(bar)	20/24	23/25
	Compression Grade	Grade	Grade
	Volume of storage tank(L)	210	210
	Volume of screw oil(L)	137	137
Diesel engine	Engine manufacturer	Commins	Yuchai
	Engine model	QSL8.9-C360	YC6MK400
	Number of cylinders	6 cylinders	6 cylinders
	Rated power(kw)	264	294
	rated speed(rpm)	1900	1800
	Air rotation speed(rpm)	1400	1300
	Diesel engine (lubricating) oil(L)	30	32
	Coolant volume(L)	70	75
	Fuel tank capcity (L)	450	450
Unit	Battery	6-QW-210MFX2	6-QW-210MFX2
	Connection size	1-G2″1-G1″	1-G2″1-G1′
	Emission Standard	National	National
	Length(mm)	3480	3720
	Width(mm)	1960	1960
	Height(mm)	1950	2060
	Total weight(kg)	5100	5300
	Operation moving way	Fixed	Fixed

Model		HGS13000-30C
Compressor	Engine displacement (m/min)	35/30
	Discharge pressure(bar)	25/30
	Compression Grade	Grade 2
	Volume of storage tank(L)	260
	Volume of screw oil(L)	145
Diesel engine	Engine manufacturer	Commins
	Engine model	QSZ13-C550
	Number of cylinders	6 cylinders
	Rated power(kw)	410
	rated speed(rpm)	1800
	Air rotation speed(rpm)	1300
	Diesel engine (lubricating) oil(L)	35
	Coolant volume(L)	80
	Fuel tank capcity (L)	550
Unit	Battery	6-QW-210MFX2
	Connection size	1-G2″1-G1″
	Emission Standard	National3
	Length(mm)	3900
	Width(mm)	2100
	Height(mm)	2560
	Total weight(kg)	5400
	Operation moving way	Fixed

After-sales Service:	Online
Lubrication Style:	Lubricated
Cooling System:	Air Cooling

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How are air compressors utilized in the aerospace industry?

1. Aircraft Systems:

2. Ground Support Equipment:

3. Component Testing:

4. Airborne Systems:

5. Environmental Control Systems:

6. Engine Testing:

7. Oxygen Systems:

air compressor

What is the role of air compressors in manufacturing and industrial processes?

Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

1. Pneumatic Tools and Equipment:

Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

2. Automation and Control Systems:

Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

3. Air Blowing and Cleaning:

Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

4. Air Separation and Gas Generation:

Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

5. HVAC Systems:

Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

6. Air Compression for Storage and Transport:

Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

7. Process Instrumentation:

Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

8. Material Handling and Pneumatic Conveying:

In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China supplier Underground Coal Mine Explosion-Proof Portable CHINAMFG / Anti-Explosive Portable Screw Air Compressor air compressor parts
editor by CX 2023-10-18