Tag Archives: with screw

China OEM High-Efficiency Direct Drive 4.5kw-250 Kw Oil-Injected Variable Frequency Rotary Screw Air Compressor with CE mini air compressor

Product Description

Product Details

Product Features

PM VSD screw air compressor, is a type of screw air compressor that employs permanent magnet synchronous motor (PMSM) and frequency conversion speed control technology.
The main advantages of this screw air compressors are:
Energy saving and high efficiency: Compared with traditional asynchronous motors, permanent magnet inverter motors have higher energy utilization efficiency, and can maintain high power utilization and output power stability under both full load and partial load conditions.

Stable operation: the frequency converter can control a smoother start of the compressor, reduce the impact on the supporting power grid and the mechanical wear and tear of the machine itself, to extend the service life of the equipment.

Low noise: inverter operation can effectively reduce the noise level of the compressor at low load.

Intelligent: Equipped with an intelligent control system, the permanent magnet inverter motor can accurately control the compressor’s working status, distribute the load and achieve more efficient energy use.

Lower maintenance costs: when start-up, frequency conversion air compressor reduces the impact on the power grid and mechanical parts of the equipment, the service life is greatly increased of the compressor’s parts (the motor contactor, motor bearings, host bearings). Energy efficient controller makes the air compressor be in the loading state when at most working time, the relevant solenoid valves and pneumatic components have greatly reduced the number of actions, the failure rate of electrical and mechanical parts is greatly reduced.

Model List

Technical Parameters Of PM VSD Screw Air Compressor -JXPMX Series

This series adopt direct drive mode and variable frequency startup, the standard power supply is 380V/50Hz, and 110V~480V voltage and 60Hz is Optional

Model	Pressure (MPa)	Pressure (psi)	FAD (m³/min)	FAD (CFM)	Power (kW/hp)	Dimension (mm)	Noise (dB)	Weight (Kg)	Pipe Diameter
JX-6APMX	0.8	116	0.68	24	4.5/ 6	800500750	≤58±2	103	G3/4
JX-10APMX	0.8	116	1.1	38.8	7.5/ 10	800600860	≤60±2	120	G1/2
	1	145	0.9	31.8
	1.3	188	0.7	24.7
JX-15APMX	0.8	116	1.7	60	11/ 15	10507501040	≤62±2	180	G3/4
	1	145	1.6	56.5
	1.3	188	1	35.3
JX-20APMX	0.8	116	2.4	84.7	15/ 20	10507501040	≤65±2	207	G3/4
	1	145	2.2	77.7
	1.3	188	1.8	63.6
JX-30APMX	0.8	116	3.5	123.6	22/ 30	11608001180	≤65±2	280	G1
	1	145	3	105.9
	1.3	188	2.5	88.3
JX-40APMX	0.8	116	5.2	183.6	30/ 40	12509501270	≤65±2	360	G1
	1	145	4.3	151.8
	1.3	188	3.2	113
JX-50APMX	0.8	116	6.1	215.4	37/ 50	12509501270	≤66±2	438	G1 1/2
	1	145	5.3	187.1
	1.3	188	4.6	162.4
JX-60APMX	0.8	116	7.4	261.3	45/ 60	125010001370	≤68±2	486	G1 1/2
	1	145	6.8	240.1
	1.3	188	5.7	201.3
JX-75APMX	0.8	116	9.5	335.4	55/ 75	160011401530	≤70±2	998	G2
	1	145	8.2	289.5
	1.3	188	6.8	240.1
JX-100APMX	0.8	116	12.2	430.8	75/ 100	175012401600	≤70±2	1096	G2
	1	145	10.9	384.9
	1.3	188	9.1	321.3
JX-125APMX	0.8	116	15.3	540.2	90/ 125	235014501830	≤82±2	1320	G2
	1	145	13.4	473.2
	1.3	188	11.6	409.6
JX-150APMX	0.8	116	19.8	699.1	110/ 150	255016801900	≤82±2	2680	DN80
	1	145	16.4	579.1
	1.3	188	14.5	512.0
JX-175APMX	0.8	116	23	812.1	132/ 175	255016801900	≤82±2	2900	DN80
	1	145	19.5	688.5
	1.3	188	16.2	572.0
JX-200APMX	0.8	116	27.2	960.4	160/ 200	305019002000	≤84±2	4150	DN80
	1	145	22.6	798.0
	1.3	188	21.2	748.6
JX-250APMX	0.8	116	30	1059.3	185/ 250	305019002000	≤84±2	4320	DN80
	1	145	27.2	960.4
	1.3	188	23.3	822.7
JX-270APMX	0.8	116	33	1165.2	200/ 270	362022002250	≤86±2	5350	DN100
	1	145	29	1571.0
	1.3	188	25.4	896.9
JX-300APMX	0.8	116	38	1341.8	220/ 300	362022002250	≤86±2	5600	DN100
	1	145	32	1129.9
	1.3	188	28.6	1009.9
JX-340APMX	0.8	116	43	1518.3	250/ 340	362022002250	≤86±2	5960	DN100
	1	145	37.5	1324.1
	1.3	188	31.2	1101.7

Presentation of all aspects

In our product showcase, the air compressor stands as a testament to our commitment to precision work for better quality. Every component, from the robust motor to the intricate valves, is crafted with meticulous attention to detail in our specialized workshops.
Our air compressor production begins with precision cutting and shaping of sheet metal, ensuring a CHINAMFG foundation. Components are assembled with meticulous care, from welding to the installation of noise-reducing mufflers, and coated for protection. Rigorous testing and careful packaging guarantee quality and safe delivery, reflecting our commitment to CHINAMFG in every compressor we craft.

Our air compressor production begins with precision cutting and shaping of sheet metal, ensuring a CHINAMFG foundation. Components are assembled with meticulous care, from welding to the installation of noise-reducing mufflers, and coated for protection. Rigorous testing and careful packaging guarantee quality and safe delivery, reflecting our commitment to CHINAMFG in every compressor we craft.

Our factory integrates advanced machinery to craft top-quality air compressors. Laser cutting and bending machines create precise metal components, while welding builds a durable structure. Test equipment ensures performance and safety, spray booths protect and enhance aesthetics, and efficient forklift handling streamlines production, delivering reliable products to our customers.

Customer testimonials overwhelmingly reflect high satisfaction with our air compressor products and service. Clients are consistently impressed by the durability and performance of our air compressors, noting their superior quality and suitability for various industrial needs. Ease of installation, impressive power output, and the smooth operation of our machines are frequently highlighted as key attributes.

Air compressors play a key role in many scenarios. In laboratory gas supply, they ensure precise and stable air pressure; in automotive spraying and metal stamping, they provide efficient power to improve production efficiency. In wood processing and rock drilling, air compressors drive tools to realize precise operation; in plastic production lines, stable airflow helps molding to ensure product quality. These application scenarios fully demonstrate the indispensability of air compressors in modern industrial production.

At exhibitions and customer visits, we carefully demonstrate the outstanding performance and innovative technology of our air compressors, allowing visitors to experience the advantages of their use in a wide range of industrial applications. From laboratory gas supply to automotive spraying, from metal stamping to wood processing to plastics production, the power and flexibility of air compressors were demonstrated in all aspects. Through on-site demonstrations and interactive exchanges, we not only enhanced our customers’ understanding of the product performance, but also collected valuable feedback

/* October 22, 2571 15:47:17 */(()=>{function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

The primary difference between single-stage and two-stage air compressors lies in the number of compression stages they have. A single-stage compressor has only one compression stage, while a two-stage compressor has two sequential compression stages.

Compression Process:

In a single-stage compressor, the entire compression process occurs in a single cylinder. The air is drawn into the cylinder, compressed in a single stroke, and then discharged. On the other hand, a two-stage compressor utilizes two cylinders or chambers. In the first stage, air is compressed to an intermediate pressure in the first cylinder. Then, the partially compressed air is sent to the second cylinder where it undergoes further compression to reach the desired final pressure.

Pressure Output:

The number of compression stages directly affects the pressure output of the air compressor. Single-stage compressors typically provide lower maximum pressure levels compared to two-stage compressors. Single-stage compressors are suitable for applications that require moderate to low air pressure, while two-stage compressors are capable of delivering higher pressures, making them suitable for demanding applications that require greater air pressure.

Efficiency:

Two-stage compressors generally offer higher efficiency compared to single-stage compressors. The two-stage compression process allows for better heat dissipation between stages, reducing the chances of overheating and improving overall efficiency. Additionally, the two-stage design allows the compressor to achieve higher compression ratios while minimizing the work done by each stage, resulting in improved energy efficiency.

Intercooling:

Intercooling is a feature specific to two-stage compressors. Intercoolers are heat exchangers placed between the first and second compression stages. They cool down the partially compressed air before it enters the second stage, reducing the temperature and improving compression efficiency. The intercooling process helps to minimize heat buildup and reduces the potential for moisture condensation within the compressor system.

Applications:

The choice between a single-stage and two-stage compressor depends on the intended application. Single-stage compressors are commonly used for light-duty applications such as powering pneumatic tools, small-scale workshops, and DIY projects. Two-stage compressors are more suitable for heavy-duty applications that require higher pressures, such as industrial manufacturing, automotive service, and large-scale construction.

It is important to consider the specific requirements of the application, including required pressure levels, duty cycle, and anticipated air demand, when selecting between a single-stage and two-stage air compressor.

In summary, the main differences between single-stage and two-stage air compressors lie in the number of compression stages, pressure output, efficiency, intercooling capability, and application suitability.

air compressor

What is the difference between a piston and rotary screw compressor?

Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:

1. Operating Principle:

Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.

2. Compression Method:

Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.

3. Efficiency:

Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.

4. Noise Level:

Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.

5. Maintenance:

Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.

6. Size and Portability:

Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.

These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.

air compressors
editor by lmc 2025-02-24

China best SCR950lbpm Low Pressure Rotary Screw Air Compressor with Technology Best Service and Completed Testing best air compressor

Product Description

Product Technical Description

Product Name	SCR950LBPM Low Pressure Rotary Screw Air Compressor with Technology Best Service and Completed Testing
Model :	Low Pressure Permanent Magnet Series (LB & LBPM)
Type:	Low Pressure Permanent Magnet Screw Air Compressor
Voltage:	380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements
Working Pressure:	1.5~5bar
Installed Motor Power:	37~185 Kw
Color:	Blue
Driven Method:	Direct Driven
Trademark:	SCR
Transport Package:	Standard Wooden Packing
Available Certificate:	CE, ISO, UL, ASME, GHOST
Origin:	ZheJiang , China
application:	Beverage , Biological Fermentation , Cement Transportation , Printing & Dyeing , Sewage Treatment , Textile

Product Features

1.Specially designed PM motor.

2.Enhanced energy savings.

3.Low Energy Consumption,Low running,maintenance cost.

4.Aptitude and intelligent Control, integrated touch-screen PLC displayer.

5.Unique safe units make whole compressor more safety, more stable,lest noise,lest energy Loss.

6.Easy to install,operate,maintain.

Specially designed PM motor:

The PM motor efficiency is even higher than IE3 premium efficiency motors. The motor uses high performance magnetic materials giving many advantages such as bearing free operation, grease free maintenance, direct 1:1 coupling without transmission losses, low noise and low vibration leading to a compact structure.

Enhanced Energy Savings:

When demand is low the PM low pressure compressor firstly reduces the speed to maintain the correct flow demand. If the air demand stops the compressor enters standby mode, saving further energy. The compressor automatically restarts and runs when the pressure drops below its setpoint.

The latest generation intelligent touchscreen controller:

SCR’s latest touchscreen interface allows simple intelligent control for your compressor. Pressure and scheduling times can be easily programmed allowing you to automatically start and stop the compressor to match production times. Remote operation and real time monitoring are built in the controller as standard.

Specially designed oil pipe system:

The oil system has been specially designed to reduce maintenance downtime and extend the periods between maintenance visits.

Model		SCR950LB-3	SCR950LB-4	SCR950LB-5
Capacity/Pressure(m3/min,/BAR)		28.8/3	28.8/4	28.8/5
Motor	Power(KW)	90	110	110
	Speed(r/min)	450-1500
	Starting way	Star-Delta
	Volt(V)	380/400/415(220)
	Motor safety grade	IP54
	Motor isolation grade	F
Electrical Supply		380(400,415)V/50Hz/3Phase, 220(440)V/60HZ/3P
Outlet Temperature(ºC)		≤ Environment Temperature+10ºC
Driven way		Direct Driven
Noise level at 1 meter		75±3dB
Cooling method		Air cooling
Oil content		1.2~3.6
Outlet Connection		DN100
Dimension	Length(mm)	2900
	Width(mm)	1860
	Height(mm)	1900
Weight(KG)		3300

Product Categories

Advantages

Application

About SCR

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Structure Type:	Closed Type
Installation Type:	Stationary Type
Type:	Twin-Screw Compressor

Customization:	Available \|

air compressor

How are air compressors used in the food and beverage industry?

Air compressors play a vital role in the food and beverage industry, providing a reliable source of compressed air for various applications. Here are some common uses of air compressors in this industry:

1. Packaging and Filling:

Air compressors are extensively used in packaging and filling operations in the food and beverage industry. Compressed air is utilized to power pneumatic systems that control the movement and operation of packaging machinery, such as filling machines, capping machines, labeling equipment, and sealing devices. The precise and controlled delivery of compressed air ensures accurate and efficient packaging of products.

2. Cleaning and Sanitization:

Air compressors are employed for cleaning and sanitization purposes in food and beverage processing facilities. Compressed air is used to operate air-powered cleaning equipment, such as air blowguns, air-operated vacuum systems, and air knives. It helps remove debris, dust, and contaminants from production lines, equipment, and hard-to-reach areas. Additionally, compressed air is used for drying surfaces after cleaning and for applying sanitizing agents.

3. Cooling and Refrigeration:

In the food and beverage industry, air compressors are utilized in cooling and refrigeration systems. Compressed air is used to drive air compressors in refrigeration units, enabling the circulation of refrigerants and maintaining optimal temperatures for food storage and preservation. The controlled airflow provided by the compressors facilitates efficient cooling and refrigeration processes.

4. Aeration and Mixing:

Air compressors are used for aeration and mixing applications in the food and beverage industry. Compressed air is introduced into processes such as fermentation, dough mixing, and wastewater treatment. It helps in promoting oxygen transfer, enhancing microbial activity, and facilitating proper mixing of ingredients or substances, contributing to the desired quality and consistency of food and beverage products.

5. Pneumatic Conveying:

In food processing plants, air compressors are employed for pneumatic conveying systems. Compressed air is used to transport bulk materials such as grains, powders, and ingredients through pipes or tubes. It enables the gentle and efficient movement of materials without the need for mechanical conveyors, reducing the risk of product damage or contamination.

6. Quality Control and Testing:

Air compressors are utilized in quality control and testing processes within the food and beverage industry. Compressed air is used for leak testing of packaging materials, containers, and seals to ensure product integrity. It is also employed for spraying air or gases during sensory analysis and flavor testing.

7. Air Agitation:

In certain food and beverage production processes, air compressors are used for air agitation. Compressed air is introduced into tanks, mixing vessels, or fermentation tanks to create turbulence and promote mixing or chemical reactions. It aids in achieving consistent product quality and uniform distribution of ingredients or additives.

It is important to note that air compressors used in the food and beverage industry must meet strict hygiene and safety standards. They may require specific filtration systems, oil-free operation, and compliance with food safety regulations to prevent contamination or product spoilage.

By utilizing air compressors effectively, the food and beverage industry can benefit from improved productivity, enhanced product quality, and efficient processing operations.

air compressor

Can air compressors be integrated into automated systems?

Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

Pneumatic Automation:

Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

Control and Regulation:

In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

Sequential Operations:

Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

Energy Efficiency:

Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

Monitoring and Diagnostics:

Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.

2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.

3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.

4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.

5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.

It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.

Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.

China best SCR950lbpm Low Pressure Rotary Screw Air Compressor with Technology Best Service and Completed Testing best air compressor
editor by CX 2024-02-24

China supplier Direct Driven Rotary Screw Scroll Air Compressor (Xl-150A 110kw) with Great quality

Product Description

XL series screw compressor, high efficency performance, energy saving, low noise, easy to operate and maintenance,
Widely used at textile, electronic, steel making, electricity, and mine industry etc.
Features as follows:
World Top brand airend /or china top quality airend, best quality performance;
Air intake adjusted automatically according air consumpting;
Siemens/ China top brand motor, high efficency, Service Factor, 1.15, CHINAMFG heavy duty bearing;
Star-delta starter, low voltage start;
CE/UL certificate award to our PLC control pannel and whole machine, any working condition will be display on the PLC pannel.;
Config big volume Aluminium casted fins cooling radiator, suitable for high temperature enviroment

Model		XL75A/W	XL100A/W	XL120A/W	XL150A/W	XL175A/W	XL200A/W	XL250A/W	XL300A/W	XL350A/W
Air delivery/Pressure		10.8/0.7	13.5/0.7	16.2/0.7	21.6/0.7	25.2/0.7	28.7/0.7	32.5/0.7	36.8/0.7	42.7/0.7
Air delivery/Pressure		10.1/0.8	12.7/0.8	15.2/0.8	20.1/0.8	24.0/0.8	27.6/0.8	30.8//0.8	34.7/0.8	40.8/0.8
(m3/min/MPa )		8.50/1.0	11.3/1.0	14.3/1.0	17.5/1.0	21.0/1.0	25.3/1.0	28.2/1.0	30.8/1.0	38.1/1.0
		7.69/1.2	10.0/1.2	12.9/1.2	16.0/1.2	18.3/1.2	22.4/1.2	25.1/1.2	28.9/12	34.9/1.2
Pressure stage		Single
Enviroment temperature		-5 ~ +45
Cooling way		Air cooling/water cooling
Discharge temperature		< +15
dB(A)		82±2			85±2			88±2		88±2
Transimissi way		Belt driven/Direct driven
Voltage v/ph/Hz		380.440/3/50.60/according requirement
Power (kw)		55	75	90	110	132	150	185	220	250
Start way		star CHINAMFG starter /soft starter/inverter start
Volume of lubricate		26	45	70	70	80	80	130	130	150
Dimension	Length mm	2100	2100	2422	2725	2725	2856	2856	3134	3134
	Width mm	1780	1780	1616	1836	1836	1868	1868	2044	2044
	Height mm	1830	1830	1705	1865	1865	1945	1945	1965	1965
Weight kg		2000	2150	2250	3100	3650	4150	4350	4700	5500
Outlet lnch		G 1″	G 1″	G1 1/ 4″	G1 1/ 4″	G1 1/ 4″	G1 1/ 2″	G1 1/ 2″	G 2″	G 2″

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Movable Type

Customization:	Available \|

air compressor

Are there special considerations for air compressor installations in remote areas?

Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

1. Power Source:

Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

2. Environmental Conditions:

Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

3. Accessibility and Transport:

Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

4. Maintenance and Service:

In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

5. Fuel and Lubricants:

For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

6. Noise and Environmental Impact:

Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

7. Communication and Remote Monitoring:

Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

Can air compressors be used for inflating tires and sporting equipment?

Yes, air compressors can be used for inflating tires and sporting equipment, providing a convenient and efficient method for achieving the desired air pressure. Here’s how air compressors are used for these purposes:

1. Tire Inflation:

Air compressors are commonly used for inflating vehicle tires, including car tires, motorcycle tires, bicycle tires, and even larger truck or trailer tires. Air compressors provide a continuous source of pressurized air, allowing for quick and accurate inflation. They are often used in automotive repair shops, gas stations, and by individuals who regularly need to inflate tires.

2. Sporting Equipment Inflation:

Air compressors are also useful for inflating various types of sporting equipment. This includes inflatable balls such as soccer balls, basketballs, footballs, and volleyballs. Additionally, air compressors can be used to inflate inflatable water toys, air mattresses, inflatable kayaks, and other recreational items that require air for proper inflation.

3. Air Tools for Inflation:

Air compressors can power air tools specifically designed for inflation purposes. These tools, known as inflators or air blow guns, provide controlled airflow for inflating tires and sporting equipment. They often have built-in pressure gauges and nozzles designed to fit different types of valves, making them versatile and suitable for various inflation tasks.

4. Adjustable Pressure:

One advantage of using air compressors for inflation is the ability to adjust the pressure. Most air compressors allow users to set the desired pressure level using a pressure regulator or control knob. This feature ensures that tires and sporting equipment are inflated to the recommended pressure, promoting optimal performance and safety.

5. Efficiency and Speed:

Air compressors provide a faster and more efficient inflation method compared to manual pumps. The continuous supply of compressed air allows for quick inflation, reducing the time and effort required to inflate tires and sporting equipment manually.

6. Portable Air Compressors:

For inflating tires and sporting equipment on the go, portable air compressors are available. These compact and lightweight compressors can be easily carried in vehicles or taken to sports events and outdoor activities, ensuring convenient access to a reliable air supply.

It is important to note that when using air compressors for inflating tires, it is recommended to follow manufacturer guidelines and proper inflation techniques to ensure safety and avoid overinflation.

air compressor

How do oil-lubricated and oil-free air compressors differ?

Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

Oil-Lubricated Air Compressors:

1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.

2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.

3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.

4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.

Oil-Free Air Compressors:

1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.

2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.

3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.

4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.

When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.

China supplier Direct Driven Rotary Screw Scroll Air Compressor (Xl-150A 110kw) with Great quality
editor by CX 2024-02-24

China Good quality Industrial Compressor 15kw Two Stage Air Compressor with Inverter Screw Air Compressor for Sale supplier

Product Description

High Quality Screw Air compressor

Our company specialize in making various kinds of compressors, such as:Diaphragm compressor,Piston compressor, screw Air compressor,Nitrogen generator,Oxygen generator ,Gas cylinder,etc. All products can be customized according to your parameters and other requirements

The CHINAMFG is a volume -type gas compression machine with a volume of work volume. The compression of the gas is achieved by changes in volume, and the change of the volume is to achieve a rotation movement in the case with a pair of rotor of the compressor.
Basic structure of the screw air compressor: In the body of the compressor, a pair of intertwined spiral rotors are parallel. Usually, there is a rotor with convex teeth outside the ball, which is called yang rotor or yang screw. The rotor with concave teeth in the festival is called a pussy rotor or yin screw. Generally, the yang rotor is connected to the original motivation. Axial force. The cylindrical roller bearing at both ends of the rotor enables the rotor to achieve radial positioning and is underneath the radial force in the compressor. At both ends of the compressor body, a certain shape and size of the pores are opened respectively. One is used for inhalation, which is called the air intake; the other is used for exhaust, called the exhaust port.

Customized is accepted , Pls provide the following information to us :
1.Working Pressure : ____ Bar
2.Rated Power : _____ KW/HP

Advantages of screw air compressor :
01.Advanced Medium Voltage Dual Stage Mainframe
1. Two-stage integrated design, oil mist spray cooling is used between stages, which reduces the temperature of the air, and the compression process is close to the most energy-saving isothermal compression. In principle, two-stage compression saves 5%-8% of energy compared to single-machine compression ;
2. It is suitable for the compression ratio matching of medium voltage, the leakage in the main engine is small, and the volumetric efficiency is high;
3. The bearing adopts imported heavy-duty bearing, which makes the force of the rotor better; the two-stage rotors are driven by helical gears respectively, so that each stage of the rotor has the best linear speed;
4. The third-generation asymmetric rotor technology, the tooth surface is processed by the German KAPP rotor grinder, creating a high-precision rotor, which is the first guarantee for the high efficiency and stability of the host.

02.High efficiency permanent magnet synchronous motor
1. IP54 protection grade, which is more stable and reliable than IP23 in harsh environment;
2. Low temperature rise design, higher efficiency, and extended the service life of the motor;
3. Use ceramic plated bearings to completely eliminate the influence of shaft current on bearings;
4. It is made of rare earth permanent magnet materials, with large torque and small current during startup and operation;
5. With reasonable magnetic field design and magnetic density distribution, the working frequency range of energy-saving motors is wider and the operating noise is low;
6. Cooperating with the operation of the frequency converter, the frequency conversion soft start is realized, which avoids the strong mechanical impact of the machine and equipment when the motor is started at full pressure, and is conducive
to protecting the mechanical equipment, reducing equipment maintenance and improving the reliability of the equipment.
03. Special valve group
1. Intake valve: It adopts a special normally closed butterfly valve for medium voltage, with a non-return function, stable operation, high precision of air volume control, built-in noise reduction design, low cavitation noise and long service life;
2. Minimum pressure maintenance valve: special valve for medium voltage, high pressure resistance, high temperature resistance, accurate opening pressure, ensuring stable pressure in the barrel, ultra-fast return to seat, strong sealing, ensuring no backflow of gas, low pressure loss and high efficiency ;
3. Temperature control valve: The unit is equipped with a mixed-flow temperature control valve to ensure that the unit is more convenient to start in a low temperature environment, and to ensure the oil supply of the unit at any time; by controlling the oil supply temperature of the main engine to ensure that the unit is in the best performance state;
4. Oil cut-off valve: special normally closed valve for medium voltage, controlled by the exhaust pressure of the machine head. When starting up, the valve opens quickly to ensure that the compressor is lubricated and warmed up as soon as possible; when shutting down, the valve prevents oil from being ejected from the intake end.

4.Advanced and reliable electric control system
1. Large-size color LCD touch screen, with good man-machine communication interface, touch screen with anti-mistouch and sleep function;
2. It adopts double frequency conversion system, which is more energy-saving. The frequency converter and the motor are perfectly matched, and the low frequency and high torque can output 180% of the rated torque;
3. According to the characteristics of medium voltage, a special program is developed, with multiple pressure sensors and multiple temperature sensors, which can comprehensively detect the operating status of the unit, and automatically control the machine status without special care;
4. Configure the Internet of Things, you can check the operating status of the unit on the mobile phone;
5. Independent air duct design, suitable for various working conditions.
5.Silent centrifugal fan
1. Adopt centrifugal fan, brand-new separate radial cooling fan design, with special cooler, better cooling effect and more energy saving;
2. Compared with axial flow fans, centrifugal fans have higher wind pressure and lower noise;
3. Using variable frequency fan control, the oil temperature is constant, prolonging the service life of lubricating oil;
4. Due to the high wind pressure, the cooler and the filter are less likely to be blocked.
6..High quality triple filter

1. The filtration area of the air filter exceeds 150% of the normal requirement, the inlet pressure loss is low, and the energy efficiency is good;2. The oil filter adopts a full-flow built-in pressure-bearing oil filter suitable for medium voltage conditions. The rated processing capacity of the oil filter is 1.3 times the circulating oil volume. The imported filter material and the design scheme of large margin are selected, which has high filtration precision and good durability.
3. The oil is divided into special customized oil, which is designed and developed for medium-pressure working conditions, with wide applicable pressure range, good separation effect and low operating pressure loss; imported glass fiber material is selected;
4. The design of the 3 filter positions is reasonable, the maintenance is convenient, and the downtime is reduced.
High quality and efficient coupling
1. The coupling is a torsional elastic coupling with a failure protection function, which can effectively damp and reduce the vibration and impact generated during operation;
2. The elastic body is only under pressure and can bear a larger load, and the drum-shaped teeth of the elastic body can avoid stress concentration.
Main Parameter

Technical parameters of oil-free water-lubricated permanent magnet variable frequency screw compressor
HYW-G	Working pressure		Exhaust volume		Power		Noise	Air outlet pipe diameter	Net weight	Dimensions(mm)
Water lubricated series	bar	psig	(m3/min)	cfm	kW	hp	dB		kg	Length	Width	Height
HYWV-7G	7	102	0.7-1.2	24.7-42.4	7.5	10	58±3	G1″	500	1135	800	1000
	8	116	0.6-1.1	21.2-38.8	7.5	10	58±3	G1″	500	1135	800	1000
	10	145	0.5-0.9	17.7-31.8	7.5	10	58±3	G1″	500	1135	800	1000
HYWV-11G	7	102	1.0-1.6	35.3-56.5	11	15	58±3	G1″	500	1135	800	1000
	8	116	0.9-1.5	31.8-53	11	15	58±3	G1″	500	1135	800	1000
	10	145	0.7-1.3	24.7-45.9	11	15	58±3	G1″	500	1135	800	1000
HYWV-15G	7	102	1.1-2	38.8-71	15	20	60±3	G1″	550	1400	1000	1200
	8	116	1-1.9	35.4-67.3	15	20	60±3	G1″	550	1400	1000	1200
	10	145	/	/	15	20	60±3	G1″	550	1400	1000	1200
HYWV-15G	7	102	/	/	15	20	60±3	G1″	550	1170	900	1100
	8	116	/	/	15	20	60±3	G1″	550	1170	900	1100
	10	145	0.9-1.6	31.8-56.6	15	20	60±3	G1″	550	1170	900	1100
HYWV-18.5G	7	102	1.8-3.1	63.6-109.5	18.5	25	61 ±3	G1″	600	1400	1000	1200
	8	116	1.6-2.8	56.5-98.9	18.5	25	61 ±3	G1″	600	1400	1000	1200
	10	145	1.5-2.5	53-88.3	18.5	25	61±3	G1″	600	1400	1000	1200
HYWV-22G	7	102	2.2-3.7	77.7-130.7	22	30	61 ±3	G1″	655	1400	1000	1200
	8	116	2.0-3.4	70.6-120.1	22	30	61 ±3	G1″	655	1400	1000	1200
	10	145	1.8-3.0	63.6-105.9	22	30	61 ±3	G1″	655	1400	1000	1200
HYWV-30G	7	102	3.1-5.2	109.5-183.6	30	40	64±3	G11/2″	1150	1920	1170	1320
	8	116	2.8-4.7	98.9-166	30	40	64±3	G11/2″	1150	1920	1170	1320
	10	145	2.5-4.3	88.3-151.9	30	40	64±3	G11/2″	1150	1920	1170	1320
HYWV-37G	7	102	3.6-6.1	127.1-215.4	37	50	64±3	G11/2″	1200	1920	1170	1320
	8	116	3.3-5.6	116.5-197.8	37	50	64±3	G11/2″	1200	1920	1170	1320
	10	145	3.0-5.0	105.9-176.6	37	50	64±3	G11/2″	1200	1920	1170	1320
HYWV-45G	7	102	4.5-7.5	158.9-264.9	45	60	66±3	G11/2″	1320	1920	1170	1320
	8	116	4.0-6.8	141.3-240.1	45	60	66±3	G11/2″	1320	1920	1170	1320
	10	145	3.6-6.0	127.1-211.9	45	60	66±3	G11/2″	1320	1920	1170	1320
HYWV-55G	7	102	6.0-10.0	211.9-353.1	55	75	66±3	DN50	1520	1930	1320	1535
	8	116	5.4-9.0	191-317.8	55	75	66±3	DN50	1520	1930	1320	1535
	10	145	4.6-7.8	162.4-275.5	55	75	66±3	DN50	1520	1930	1320	1535
HYWV-75G	7	102	7.8-13.0	275.5-459.1	75	100	70±3	DN50	1620	1930	1320	1535
	8	116	7.2-12.0	254.3-423.8	75	100	70±3	DN50	1620	1930	1320	1535
	10	145	6.0-10.0	211.9-353.1	75	100	70±3	DN50	1620	1930	1320	1535
HYWV-90G	7	102	9.3-15.5	328.4-547.4	90	120	70±3	DN50	1800	1930	1320	1535
	8	116	8.4-14.0	296.6-494.4	90	120	70±3	DN50	1800	1930	1320	1535
	10	145	7.5-12.5	264.9-414	90	120	70±3	DN50	1800	1930	1320	1535
HYWV-110G	7	102	12.0-20.0	423.8-706.3	110	150	72±3	DN80	3100	2300	1600	1750
	8	116	10.8-18.0	381.4-635.7	110	150	72±3	DN80	3100	2300	1600	1750
	10	145	9.6-16.0	339-565	110	150	72±3	DN80	3100	2300	1600	1750
HYWV-132G	7	102	15.0-25.0	527.9-882.9	132	175	72±3	DN80	3250	2300	1600	1750
	8	116	13.8-23.0	487.3-812.2	132	175	72±3	DN80	3250	2300	1600	1750
	10	145	12.0-20.0	423.8-706.3	132	175	72±3	DN80	3250	2300	1600	1750
HYWV-160G	7	102	16.2-27.0	572.1-953.5	160	215	72±3	DN100	4500	2860	1600	1800
	8	116	15.3-25.5	540.3-900.5	160	215	72±3	DN100	4500	2860	1600	1800
	10	145	14.4-24.0	508.5-847.6	160	215	72±3	DN100	4500	2860	1600	1800
HYWV-185G	7	102	18.0-30.0	635.7-1059.4	185	250	74±3	DN100	4500	2860	1600	1800
	8	116	16.8-28.0	593.3-988.8	185	250	74±3	DN100	4500	2860	1600	1800
	10	145	15.0-25.0	529.7-882.9	185	250	74±3	DN100	4500	2860	1600	1800
HYWV-200G	7	102	21.6-36.0	762.8-1271.3	200	270	74±3	DN125	4800	3150	1850	2050
	8	116	19.8-33.0	699.2-1165.4	200	270	74±3	DN125	4800	3150	1850	2050
	10	145	16.2-27.0	572.1-953.5	200	270	74±3	DN125	4800	3150	1850	2050
HYWV-250G	7	102	25.8-43.0	911.1-1518.5	250	350	74±3	DN125	5200	3150	1850	2050
	8	116	24.6-41.0	868.7-1447.9	250	350	74±3	DN125	5200	3150	1850	2050
	10	145	22.8-38.0	805.2-1342	250	350	74±3	DN125	5200	3150	1850	2050

Workshop of natural gas compressor
Our products
Our Certificate : CE and ISO certification
Our exhibition for the gas compressor
Our Service for diaphragm compressor :
1.Service time : 24*7 Hours
2.Customized Service
3.Perfect pre-sale,sale,after-sales service
4.FAT
5.Onsite commissioning Service
6.18 months warranty period

FAQ :
Q1.How about your after-sales service?
A: 1. Provide customers with intallation and commissioning online instructions.
2. Well-trained engineers available to overseas after-sales service.

Q2.What’s payment term?
A: T/T, L/C, D/P, Western Union, Trade Assurance and etc. Also we could accept USD, RMB, GBP, Euro and other currency.

Q3 : How long is your air compressor warranty?
A: Usually 1 year /12 Months for whole compressor machine, 2years/24months for air end (except maintenance spare parts.). And we can provide further warranty if necessary. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	18 Months
Warranty:	18 Months
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

What are the advantages of using an air compressor in construction?

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

air compressor

How do you choose the right air compressor for woodworking?

Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

1. Required Air Volume (CFM):

Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

2. Tank Size:

Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

3. Maximum Pressure (PSI):

Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

4. Noise Level:

Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

5. Portability:

Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

6. Power Source:

Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

7. Quality and Reliability:

Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

8. Budget:

Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

air compressor

What are the safety considerations when operating an air compressor?

Operating an air compressor requires careful attention to safety to prevent accidents, injuries, and equipment damage. Here are some important safety considerations to keep in mind:

1. Read the Manual: Before operating an air compressor, thoroughly read and understand the manufacturer’s instruction manual. Familiarize yourself with the specific safety guidelines, recommended operating procedures, and any specific precautions or warnings provided by the manufacturer.

2. Proper Ventilation: Ensure that the area where the air compressor is operated has adequate ventilation. Compressed air can produce high levels of heat and exhaust gases. Good ventilation helps dissipate heat, prevent the buildup of fumes, and maintain a safe working environment.

3. Personal Protective Equipment (PPE): Always wear appropriate personal protective equipment, including safety glasses or goggles, hearing protection, and non-slip footwear. Depending on the task, additional PPE such as gloves, a dust mask, or a face shield may be necessary to protect against specific hazards.

4. Pressure Relief: Air compressors should be equipped with pressure relief valves or devices to prevent overpressurization. Ensure that these safety features are in place and functioning correctly. Regularly inspect and test the pressure relief mechanism to ensure its effectiveness.

5. Secure Connections: Use proper fittings, hoses, and couplings to ensure secure connections between the air compressor, air tools, and accessories. Inspect all connections before operation to avoid leaks or sudden hose disconnections, which can cause injuries or damage.

6. Inspect and Maintain: Regularly inspect the air compressor for any signs of damage, wear, or leaks. Ensure that all components, including hoses, fittings, and safety devices, are in good working condition. Follow the manufacturer’s recommended maintenance schedule to keep the compressor in optimal shape.

7. Electrical Safety: If the air compressor is electric-powered, take appropriate electrical safety precautions. Use grounded outlets and avoid using extension cords unless approved for the compressor’s power requirements. Protect electrical connections from moisture and avoid operating the compressor in wet or damp environments.

8. Safe Start-Up and Shut-Down: Properly start and shut down the air compressor following the manufacturer’s instructions. Ensure that all air valves are closed before starting the compressor and release all pressure before performing maintenance or repairs.

9. Training and Competence: Ensure that operators are adequately trained and competent in using the air compressor and associated tools. Provide training on safe operating procedures, hazard identification, and emergency response protocols.

10. Emergency Preparedness: Have a clear understanding of emergency procedures and how to respond to potential accidents or malfunctions. Know the location of emergency shut-off valves, fire extinguishers, and first aid kits.

By adhering to these safety considerations and implementing proper safety practices, the risk of accidents and injuries associated with operating an air compressor can be significantly reduced. Prioritizing safety promotes a secure and productive working environment.

China Good quality Industrial Compressor 15kw Two Stage Air Compressor with Inverter Screw Air Compressor for Sale supplier
editor by CX 2024-02-24

China OEM 15kw 20 HP 16bar Integrated Air Compressor Screw Type Compressor with 500liters Air Tank air compressor for car

Product Description

FAQ

Q1: Warranty terms of your machine?
A1: One year warranty for the machine and technical support according to your needs.

Q2: Will you provide some spare parts of the machines?
A2: Yes, of course.

Q3: What about product package?
A3: We pack our products strictly with standard seaworthy case.

Q4: Can you use our brand?
A4: Yes, OEM is available.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 3-15 days. Other voltage or other color we will delivery within 25-30 days.

Q6: How Many Staff Are There In your Factory?
A6: About 100.

Q7: What’s your factory’s production capacity?
A7: About 2000 units per month.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Spare Parts
Warranty:	1 Year
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How are air compressors used in the food and beverage industry?

1. Packaging and Filling:

2. Cleaning and Sanitization:

3. Cooling and Refrigeration:

4. Aeration and Mixing:

5. Pneumatic Conveying:

6. Quality Control and Testing:

7. Air Agitation:

By utilizing air compressors effectively, the food and beverage industry can benefit from improved productivity, enhanced product quality, and efficient processing operations.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

How do oil-lubricated and oil-free air compressors differ?

Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

Oil-Lubricated Air Compressors:

Oil-Free Air Compressors:

China OEM 15kw 20 HP 16bar Integrated Air Compressor Screw Type Compressor with 500liters Air Tank air compressor for car
editor by CX 2024-02-21

China OEM Energy-Saving Power Frequency Screw Air Compressor Industrial Grade 110kw 150A with Great quality

Product Description

Product Parameters

Technical parameters of fixed screw air compressor

Model No	Power	Noise	Exhaust oil content	Cooling method	External dimensions	weight(kg)	Mpa
10A	7.5kw	66+2db	≤3ppm	forced air cooling	850×650×800	190	0.8/1.0/1.3/1.6
20A	15kw	68+2db			1050×700×1000	300	0.8/1.0/1.3/1.6
30A	22kw	69+2db			1250×850×1100	450	0.8/1.0/1.3/1.6
50A	37kw	70+2db			1250×950×1200	650	0.8/1.0/1.3/1.6
60A	45kw	72+2db			1340×1000×1250	850	0.8/1.0/1.3/1.6
75A	55kw	73+2db			1340×1000×1250	1150	0.8/1.0/1.3/1.6
100A	75kw	75+2db			1340×1000×1250	1355	0.8/1.0/1.3/1.6
125A	90kw	75+2db			2085×1195×1500	1545	0.8/1.0/1.3/1.6
150A	110kw	75+2db			2430×1440×1760	1850	0.8/1.0/1.3/1.6
175A	132kw	75+2db			2430×1440×1760	1950	0.8/1.0/1.3/1.6

Product Description

This series of screw air compressors is easy to install and reliable in quality. We have carefully designed and assembled them in terms of equipment economy, reliability, and operation and maintenance. The whole machine runs reliably and flexibly. Strong adaptability to environmental conditions, ensuring long-term reliable operation of the compressor.

Detailed Photos

Certifications

Installation Instructions

Company Profile

HangZhou Xihu (West Lake) Dis. Mechanical Group Co., Ltd. was established in 2011 and is located in HangZhou, ZheJiang , the logistics capital of China. It is a key enterprise specializing in welding and cutting equipment, seamless steel cylinders, and carbon dioxide fire extinguishers and pressure reducers. Our main products include over 10 series and over 100 varieties of seamless gas cylinders, welded steel cylinders 2KG-24KG CO2 fire extinguisher cylinder valves, high-pressure valves, gas pipeline valves, gas pressure reducer check valves, various types of valves for gas cylinders, welding and cutting equipment for electric welding machines, gas detection equipment for seamless steel cylinders, etc., widely used in industries such as chemical hospitals, metallurgy, water and electricity, coal, and mechanical processing.

The company’s products have successively passed ISO9000 certification, CE certification, KGS certification, SNI certification, and BV certification. It has been awarded “Trustworthy Product in ZheJiang Province” and “Famous Brand Product in HangZhou City”. Quality first, honesty is the consistent service tenet of the company. “Innovation, refinement, truth and progress” is the goal that the company will always strive for. Our products have been exported to over 30 countries and regions including Africa, North America, the Middle East, and Southeast Asia, and are highly praised by domestic and foreign customers. Carefully produce every product and serve every customer with integrity.
Customer satisfaction is the driving force for us in Xihu (West Lake) Dis. to continue moving forward!

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Factory Aftermarket
Warranty:	First Year
Lubrication Style:	Lubricated

Samples:	US$ 5938/Piece 1 Piece(Min.Order) \| Order Sample Customized on request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How are air compressors used in the food and beverage industry?

1. Packaging and Filling:

2. Cleaning and Sanitization:

3. Cooling and Refrigeration:

4. Aeration and Mixing:

5. Pneumatic Conveying:

6. Quality Control and Testing:

7. Air Agitation:

By utilizing air compressors effectively, the food and beverage industry can benefit from improved productivity, enhanced product quality, and efficient processing operations.

air compressor

What is the impact of altitude on air compressor performance?

The altitude at which an air compressor operates can have a significant impact on its performance. Here are the key factors affected by altitude:

1. Decreased Air Density:

As altitude increases, the air density decreases. This means there is less oxygen available per unit volume of air. Since air compressors rely on the intake of atmospheric air for compression, the reduced air density at higher altitudes can lead to a decrease in compressor performance.

2. Reduced Airflow:

The decrease in air density at higher altitudes results in reduced airflow. This can affect the cooling capacity of the compressor, as lower airflow hampers the dissipation of heat generated during compression. Inadequate cooling can lead to increased operating temperatures and potential overheating of the compressor.

3. Decreased Power Output:

Lower air density at higher altitudes also affects the power output of the compressor. The reduced oxygen content in the air can result in incomplete combustion, leading to decreased power generation. As a result, the compressor may deliver lower airflow and pressure than its rated capacity.

4. Extended Compression Cycle:

At higher altitudes, the air compressor needs to work harder to compress the thinner air. This can lead to an extended compression cycle, as the compressor may require more time to reach the desired pressure levels. The longer compression cycle can affect the overall efficiency and productivity of the compressor.

5. Pressure Adjustments:

When operating an air compressor at higher altitudes, it may be necessary to adjust the pressure settings. As the ambient air pressure decreases with altitude, the compressor’s pressure gauge may need to be recalibrated to maintain the desired pressure output. Failing to make these adjustments can result in underinflated tires, improper tool performance, or other issues.

6. Compressor Design:

Some air compressors are specifically designed to handle higher altitudes. These models may incorporate features such as larger intake filters, more robust cooling systems, and adjusted compression ratios to compensate for the reduced air density and maintain optimal performance.

7. Maintenance Considerations:

Operating an air compressor at higher altitudes may require additional maintenance and monitoring. It is important to regularly check and clean the intake filters to ensure proper airflow. Monitoring the compressor’s operating temperature and making any necessary adjustments or repairs is also crucial to prevent overheating and maintain efficient performance.

When using an air compressor at higher altitudes, it is advisable to consult the manufacturer’s guidelines and recommendations specific to altitude operations. Following these guidelines and considering the impact of altitude on air compressor performance will help ensure safe and efficient operation.

air compressor

Are there portable air compressors available for home use?

Yes, there are portable air compressors specifically designed for home use. These portable models offer convenience, versatility, and ease of use for various tasks around the house. Here are some key points about portable air compressors for home use:

1. Compact and Lightweight: Portable air compressors are typically compact and lightweight, making them easy to transport and store. They are designed with portability in mind, allowing homeowners to move them around the house or take them to different locations as needed.

2. Electric-Powered: Most portable air compressors for home use are electric-powered. They can be plugged into a standard household electrical outlet, eliminating the need for gasoline or other fuel sources. This makes them suitable for indoor use without concerns about emissions or ventilation.

3. Versatile Applications: Portable air compressors can be used for a wide range of home applications. They are commonly used for inflating tires, sports equipment, and inflatable toys. They are also handy for operating pneumatic tools such as nail guns, staplers, and paint sprayers. Additionally, portable air compressors can be used for cleaning tasks, powering airbrushes, and other light-duty tasks around the house.

4. Pressure and Capacity: Portable air compressors for home use typically have lower pressure and capacity ratings compared to larger industrial or commercial models. They are designed to meet the needs of common household tasks rather than heavy-duty applications. The pressure and capacity of these compressors are usually sufficient for most home users.

5. Oil-Free Operation: Many portable air compressors for home use feature oil-free operation. This means they do not require regular oil changes or maintenance, making them more user-friendly and hassle-free for homeowners.

6. Noise Level: Portable air compressors designed for home use often prioritize low noise levels. They are engineered to operate quietly, reducing noise disturbances in residential environments.

7. Cost: Portable air compressors for home use are generally more affordable compared to larger, industrial-grade compressors. They offer a cost-effective solution for homeowners who require occasional or light-duty compressed air applications.

When considering a portable air compressor for home use, it’s important to assess your specific needs and tasks. Determine the required pressure, capacity, and features that align with your intended applications. Additionally, consider factors such as portability, noise level, and budget to choose a suitable model that meets your requirements.

Overall, portable air compressors provide a practical and accessible compressed air solution for homeowners, allowing them to tackle a variety of tasks efficiently and conveniently within a home setting.

China OEM Energy-Saving Power Frequency Screw Air Compressor Industrial Grade 110kw 150A with Great quality
editor by CX 2024-02-21

China Best Sales Twt1100 Good Quality Mobile Diesel Engine Screw Air Compressor for Mining with high quality

Product Description

Product Parameters

Model	TWT1100D-25T
Number of Compression Stages	Double Stage
Displacement(CFM/M/min)	1100/31
Working Pressure(psig/bar)	362.5/25
Screw oil(L)	100
Engine
Engine model	Yuchai YC6MK400-H300
Rated power(HP/KW)	400/295
Rated speed/rapid speed(rpm)	1900/1300
Cylinders	6
Bore(mm)	129
Stroke(mm)	155
Total Displacement(L)	12
Emission class	EU II TIER 3

Battery Voltage (V)	24
Fuel tank capacity (L)	800
Interface Size X Number	G3/4″ 1, G 2″ 1
Tire Size X Number	ST235/80R16x4
Weight (Kgs)	5500
Overall Dimension (mm)	390021002300
Noise {dB(A)}	85+5
Operating Ambient Temperature(°C)	-10°C~50°C(special working conditions can be customized)

Product Description

TWT1100-25T

TEWATT 1100cim / 25ba mobile open air compressor is equipped with efficient TEWATT two-stage machine, the unique design of TEWATT main engine combines traditional and new technology, TEWATT is used with YUCHA engine, because of its low purchase and maintenance costs, even in high temperature or dusty workplaces. The performance of TEWAT press is still very good, widely used in Wells, foundation piling, geothermal, oil field gas mining, pipeline pressure test and other fields, always meet the high temperature, high cold, high dust, high altitude and other harsh environment application requirements.

Features and advantages:
American TEWATT provides efficient two-stage compression screw host with ultra-low specific power
YUCHAI engine with National III emission standard has strong power and low maintenance cost
TW-(CU-0005 controller, set dynamic gas volume regulation, flow control, remote monitoring functions in one, improve the user’s drilling speed, reduce fuel consumption, but also provides the unit 24 hours remote monitoring function, to ensure that customers have no worries engine and host air filter filtering effect is good, long replacement cycle. The air intake system has been tested over a million times.

certificate
CE, SGS ISO9001 /ISO 14001, sound exposure certificate

Wheel belt chassis can be added

It can be customized as a 4-wheel portable screw air compressor.

Other Product

Water Well Drilling Rig

Drill Truck

Core Drilling Rig

Air compressor

Company Profile

^{Wanhai Machinery Co., Ltd., situated in HangZhou, ZheJiang , is a reputable manufacturer specializing in the design, development, production, and distribution of top-notch drilling machinery and equipment. Our extensive product range encompasses a variety of drilling rigs, including oil and gas drilling rigs, water well drilling rigs, core drilling rigs, and more, catering to diverse drilling tasks and scenarios. Our unwavering commitment lies in delivering exceptional products and services that are tailored to meet the specific requirements of each customer. We take pride in our dedicated after-sales team, who promptly and effectively address any concerns or issues that may arise, ensuring utmost customer satisfaction.
We eagerly anticipate establishing enduring, reliable, and mutually beneficial relationships with every customer we serve. Should you express interest in our products, please do not hesitate to reach out to us. We assure you that our team will provide you with the necessary information and assistance to make an informed decision.}

At Wanhai Machinery Co., Ltd., we prioritize quality and innovation in all aspects of our operations. Our state-of-the-art manufacturing facilities, coupled with our team of experienced professionals, enable us to consistently deliver drilling machinery and equipment of the highest standards. We stay abreast of the latest technological advancements in the industry, ensuring that our products are at the forefront of efficiency and performance. Furthermore, we understand that each drilling project comes with its unique set of challenges and requirements. Therefore, we offer customized solutions to cater to the specific needs of our customers.

Foreign customer

FAQ

^{1. Are you a trading company or a manufacturer?}
We are a professional manufacturer. Our factory mainly produces water well drilling rigs, core drilling rigs, down-the-hole drilling rigs, pile drivers, etc. The products have been exported to hundreds of countries around the world and enjoy a high reputation all over the world.

^{2.How to inspect the goods?
1) Support customers to come to the factory for on-site inspection.
2) Support customers to designate third-party companies to inspect goods.
3) Support video inspection.}

3.How long is your delivery cycle?
1) In the case of stock, we can deliver the machine within 7 days.
2) Under standard production, we can deliver the machine within 15-20 days.
3) In the case of customization, we can deliver the machine within 25-30 days.

4. What’s your terms of payment?
T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Technical Services
Warranty:	1 Year
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How are air compressors utilized in the aerospace industry?

Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:

1. Aircraft Systems:

Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.

2. Ground Support Equipment:

Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.

3. Component Testing:

Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.

4. Airborne Systems:

In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.

5. Environmental Control Systems:

Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.

6. Engine Testing:

In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.

7. Oxygen Systems:

In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.

It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.

air compressor

What is the impact of altitude on air compressor performance?

The altitude at which an air compressor operates can have a significant impact on its performance. Here are the key factors affected by altitude:

1. Decreased Air Density:

2. Reduced Airflow:

3. Decreased Power Output:

4. Extended Compression Cycle:

5. Pressure Adjustments:

6. Compressor Design:

7. Maintenance Considerations:

air compressor

In which industries are air compressors widely used?

Air compressors find extensive usage across various industries due to their versatility and ability to generate compressed air. Here are some industries where air compressors are widely employed:

1. Manufacturing: Air compressors are essential in manufacturing processes for powering pneumatic tools and equipment. They are used for tasks such as operating assembly lines, powering robotic machinery, running paint sprayers, and driving pneumatic actuators.

2. Construction: Air compressors play a crucial role in the construction industry. They power pneumatic tools like jackhammers, nail guns, impact wrenches, and concrete breakers. Compressed air is also used for concrete spraying, sandblasting, and operating air-powered lifts and hoists.

3. Automotive: Air compressors are widely used in automotive manufacturing and repair. They power air tools used in auto body shops, tire inflation equipment, pneumatic lifts, and air-operated brake systems. Compressed air is also utilized in vehicle painting and drying processes.

4. Oil and Gas: The oil and gas industry extensively relies on air compressors for various applications. They are used for pneumatic drilling, powering pneumatic tools in refineries and petrochemical plants, operating pneumatic valves and actuators, and providing instrument air for control systems.

5. Food and Beverage: Air compressors are employed in the food and beverage industry for tasks such as packaging, bottling, and sealing. They power pneumatic conveying systems, control air pressure in food processing equipment, and provide clean compressed air for food handling and storage.

6. Pharmaceutical and Healthcare: Air compressors find application in pharmaceutical manufacturing and healthcare facilities. They are used for operating medical equipment, such as ventilators and dental tools. Compressed air is also utilized in pharmaceutical processes, including tablet coating, fluid bed drying, and aseptic packaging.

7. Aerospace: The aerospace industry relies on air compressors for various applications, including aircraft maintenance and assembly. They power pneumatic tools for aircraft repair, provide compressed air for cleaning and pressurizing systems, and support ground operations, such as tire inflation and aircraft de-icing.

8. Mining: Air compressors are extensively used in the mining industry. They power pneumatic tools for drilling, rock blasting, and excavation. Compressed air is also utilized for ventilation, conveying materials, and operating underground equipment.

9. Energy and Utilities: Air compressors play a vital role in the energy and utilities sector. They are used in power generation plants for pneumatic control systems, instrument air, and operating pneumatic valves. Compressed air is also employed for cleaning and maintenance purposes.

These are just a few examples of the industries where air compressors are widely utilized. The versatility and reliability of air compressors make them indispensable in numerous applications across diverse sectors.

China Best Sales Twt1100 Good Quality Mobile Diesel Engine Screw Air Compressor for Mining with high quality
editor by CX 2024-02-20

China Custom 132kw Air Cooling Variable Speed Drive High Quality Silent Industrial Twin Screw Rotary Oil Free Dry Air Compressor with Hot selling

Product Description

	Specification(VSD series)
	Model	Capacity M³/min	Power kw	Noise level db	Weight KG
	Model	3.5~10bar	Power kw	Noise level db	Water Cooling	Air Cooling
OFA1VSD	OFA15VSD	1.1-3.3	15	74		930
	OFA22VSD	4.5-5.6	22	74		1150
	OFA30VSD	4-6.6	30	74		1300
	OFW37VSD	5-8.4	37	74		1600
	OFW45VSD	6.1-11.1	45	74		1750
OFA2VSD	OFA55VSD	7.3-9.4	55	74		1900
	OFA75VSD	10.7-12.4	75	74		2630
	OFA90VSD	12.7-15.4	90	74		2700
OFA3VSD	OFA110VSD	16.0-19.5	110	74
	OFA132VSD	18.8-21.8	132	74		4300
	OFA160VSD	24.0-29.6	160	74		4300
OFA4VSD	OFA200VSD	12.2-36.6	200	74
	OFA250VSD	14.2-41.8	250	74		6950
	OFA275VSD	15.8-47.4	275	74
	OFA315VSD	45.0-52.1	315	74		6950
OFA5VSD	OFA355VSD	50.4-57.5	355	74
OFW1VSD	OFW37VSD	2-5.9	37	74
OFW1VSD	OFW45VSD	2.3-7	45	74
OFW2VSD	OFW55VSD	4.5-8.8	55	74
	OFW75VSD	4.5-13.2	75	74	2170
	OFW90VSD	4.5-15.5	90	74	2220
OFW3VSD	OFW110VSD	6.4-19.1	110	74
	OFW132VSD	7.7-22.4	132	74	3500
	OFW160VSD	14.5-42.9	160	74	3500
OFW4VSD	OFW200VSD	18-36.1	200	74
	OFW250VSD	19.-38.4	250	74	6400
	OFW275VSD	20.0-41.0	275	74
	OFW315VSD	46.0-50.9	315	74	6650
OFW5VSD	OFW355VSD	50.4-56.3	355	74	6950
	OFW400VSD	55.8-62.1	400	74	7060
	OFW450VSD	63.8-76.5	450	74	8400
	OFW500VSD	73.1-83.9	500	74	8400
	OFW630VSD	89.0-102.9	630	74	9125
	OFW750VSD	101.8-122.8	750	74	9225

Company Profile

ZheJiang Napu compressor Technology Co.,LTD was established in 2012 based in ZheJiang ,specializing in oil-free rotary screw air compressors, offering a wide range of products from airends to compressors .
With over 10 years experience in oil free screw air compressor. NAPU Compressor is compliant with ISO 8573-1, Class 0 standard and audited by TUV Rheinland and China National Quality Inspection Center of Compressor and Refrigerator.
The company is also compliant with ISO 9001:14001 and is CHINAMFG in the domestic market for its quality-driven culture. The oil-free compressors manufactured by the company are used in a variety of sectors including some of our valued clients like CASC-China Aerospace Science Corporation, NORINCO-China North Industries Group, CNNC-China National Nuclear Group, CHANG AN AUTO, SINOPHARM, BYD and CALT and Sino-Chemical etc.
Continuous improvement in productivity and efficiency is our goal, and we continue to offer an extensive services including our own branded oil-free compressor package as well as after-sales services for other leading brands.

Product Features

1. In house designed airend
2. 100% oil free air certified by Germany TUV.
3. Double-layer structure to reduce he noise.
4. Air Cooling and Water cooling are available.
5. VSD control are available.
6.Touch Screen PLC with preset running schedule, more intelligent control.
7.OEM&ODM service are accepted

FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of oil free air compressors. More than 20 years of experience in air compressor manufacturing.

Q2. What’s payment term ?
A: T/T, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q3. How about your after-sales service ?
A: 1.We can provide customers with installation and commissioning online instructions.

Q4. How about your warranty?
A: One year for the whole machine and 5 years for screw air end, except consumable spare parts.

Q5. Do you have any certificate ?
A: Yes, we can offer CE ,ISO and certificate as clients’ demande.

Q6. How do you control quality ?
A: 1. The raw materials are strictly inspected
2. Each compressor must pass at least 8 hours of continuous testing before leaving the factory.

Q7.How long could your air compressor be used?
A: Usually, more than over 10 years.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	12 Months
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

Customization:	Available \|

air compressor

How are air compressors used in the food and beverage industry?

1. Packaging and Filling:

2. Cleaning and Sanitization:

3. Cooling and Refrigeration:

4. Aeration and Mixing:

5. Pneumatic Conveying:

6. Quality Control and Testing:

7. Air Agitation:

By utilizing air compressors effectively, the food and beverage industry can benefit from improved productivity, enhanced product quality, and efficient processing operations.

air compressor

How are air compressors used in refrigeration and HVAC systems?

Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:

1. Refrigerant Compression:

In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.

2. Refrigeration Cycle:

The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.

3. HVAC Cooling and Heating:

In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.

4. Air Conditioning:

Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.

5. Compressor Types:

Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.

6. Energy Efficiency:

Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.

By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.

air compressor

What are the different types of air compressors?

There are several different types of air compressors, each with its own unique design and operating principle. Here’s an overview of the most commonly used types:

1. Reciprocating Air Compressors: Reciprocating air compressors, also known as piston compressors, use one or more pistons driven by a crankshaft to compress air. They operate by drawing air into a cylinder, compressing it with the piston’s up-and-down motion, and discharging the compressed air into a storage tank. Reciprocating compressors are known for their high pressure capabilities and are commonly used in industrial applications.

2. Rotary Screw Air Compressors: Rotary screw air compressors utilize two interlocking screws to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads. These compressors are known for their continuous duty cycle, high efficiency, and quiet operation. They are widely used in industrial, commercial, and automotive applications.

3. Centrifugal Air Compressors: Centrifugal air compressors rely on the principle of centrifugal force to compress air. They use a high-speed impeller to accelerate the incoming air and then convert the kinetic energy into pressure energy. Centrifugal compressors are commonly used in large-scale industrial applications that require high volumes of compressed air.

4. Rotary Vane Air Compressors: Rotary vane air compressors employ a rotor with sliding vanes that compress the air. As the rotor rotates, the vanes slide in and out of the rotor, creating compression chambers. Air is drawn in, trapped, and compressed as the vanes move. These compressors are compact, reliable, and suitable for small to medium-sized applications.

5. Axial Flow Air Compressors: Axial flow air compressors are primarily used in specialized applications such as aircraft engines and gas turbines. They utilize a series of rotating and stationary blades to compress air in a continuous flow. Axial flow compressors are known for their high flow rates and are designed for applications that require large volumes of compressed air.

6. Scroll Air Compressors: Scroll air compressors consist of two interlocking spirals or scrolls that compress the air. One spiral remains stationary while the other orbits around it, creating a series of expanding and contracting pockets that compress the air. Scroll compressors are compact, reliable, and commonly used in applications where low noise and oil-free air are required, such as medical and dental equipment.

These are just a few examples of the different types of air compressors available. Each type has its own advantages, capabilities, and ideal applications. The choice of air compressor depends on factors such as required pressure, flow rate, duty cycle, noise level, oil-free operation, and specific application requirements.

China Custom 132kw Air Cooling Variable Speed Drive High Quality Silent Industrial Twin Screw Rotary Oil Free Dry Air Compressor with Hot selling
editor by CX 2024-02-17

China wholesaler Hot Sale 5bar 55kw Low Pressure Screw Air Compressor with high quality

Product Description

Hot Sale 5 Bar 55KW Low Pressure Screw Air Compressor

Technical Parameters Of fixed speed screw air compressor:

Model	Power (kw)	Air folw/pressure (m3/Bar)	Outlet size	Noise	Unit weight (KG)	Unit size (mm)
WZS-22PMD-2S	22	6.25m³/5Bar	RP1 1/2	66±3	1350	1800x1270x1550
WZS-30PMD-2S	30	7.2m³/5Bar	RP1 1/2	66±3	1550	1800x1270x1550
WZS-37PMD-2S	37	10m³/5Bar	RP1 1/2	68±3	1900	1800x1270x1550
WZS-45PMD-2S	45	12m³/5Bar	RP2	68±3	2100	1800x1270x1550
WZS-55PMD-2S	55	13.8m³/5Bar	RP2	70±3	2200	2100x1360x1660
WZS-75PMD-2S	75	18.5m³/5Bar	DN65	70±3	2800	2800x1750x1900
WZS-90PMD-2S	90	23m³/5Bar	DN65	72±3	2800	2800x1750x1900
WZS-110PMD-2S	110	28m³/5Bar	DN80	72±3	3200	3200x1750x2250
WZS-132PMD-2S	132	32.5m³/5Bar	D270N80	72±3	3500	3200x1750x2250
WZS-160PMD-2S	160	41m³/5Bar	DN125	74±3	4100	3200x1750x2350
WZS-185PMD-2S	185	45m³/5Bar	DN125	74±3	4500	3800x2150x2250
WZS-200PMD-2S	200	50m³/5Bar	DN150	76±3	5100	3800x2150x2250
WZS-220PMD-2S	220	54m³/5Bar	DN150	76±3	6200	3800x2250x2250
WZS-250PMD-2S	250	61m³/5Bar	DN150	78±3	6600	4200x2250x2400

Before quotation:
1.Before quoting, what should users offer?
1).Discharge pressure (Bar, Mpa or Psi)
2).Air discharge/Air flow/Air capacity (m3/min or CFM)
3).Power supply (220/380V, 50/60Hz, 3Phase)

2.If I don’t know the pressure and air flow, what should I do?
1).Take the picture of nameplate, we will advise the suitable air compressor to you.
2).Tell us what industry you are, we can advise the suitable 1 (so as to air tank / air dryer / air filters).

High Efficiency PM Motor and Energy Saving
*With the high-performance permanent magnet material, PM motor won’t lose magnetism even under 120°c and can run for more than 15 years.
*No motor bearing: permanent magnet rotors is installed directly on the stretch out shaft of Male rotor. This structure doesn’t have the bearing and eliminates the motor bearing fault.
*Comparing to normal variable speed motor, the permanent magnet synchronous motor performs with even better energy efficiency. Especially in the low-speed condition, it can still maintain a high motor efficiency.

SHIPPING
Delivery: time 5-25 working days after payment receipt confirmed(based on actual quantity)
packing:standard export packing. or customized packing as your
Professional: goods shipping forwarder.

FAQ
Q: OEM/ODM, or customers logo printed is available?
Yes, OEM/ODM, customers logo is welcomed.

Q: Delivery date?
Usually 5-25 workdays after receiving deposit, specific delivery date based on order quantity

Q: what’s your payment terms?
Regularly doing 30% deposit and 70% balance by T/T, Western Union, Paypal, other payment terms also can be discussed based on our cooperation.

Q: How to control your quality?
We have professional QC team, control the quality during the mass production and inspect completely goods before shipping.

Q: If we don’t have shipping forwarder in China, would you do this for us?
We can offer you best shipping line to ensure you can get the goods timely at best price.

Q: come to China before, can you be my guide in China?
We are happy to provide you orservice, such as booking ticket, pick up at the airport, booking hotel, accompany visiting market or factory

,
Thank you very much for viewing this page, and wish you a nice day!

Contacts:Vicky Liu
Mob: -173-1655-1856

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil-less
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

Are there special considerations for air compressor installations in remote areas?

1. Power Source:

2. Environmental Conditions:

3. Accessibility and Transport:

4. Maintenance and Service:

5. Fuel and Lubricants:

6. Noise and Environmental Impact:

7. Communication and Remote Monitoring:

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

Compression Process:

Pressure Output:

Efficiency:

Intercooling:

Applications:

air compressor

What maintenance is required for air compressors?

Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

China wholesaler Hot Sale 5bar 55kw Low Pressure Screw Air Compressor with high quality
editor by CX 2024-02-14

China best 50HP 37kw OEM Industrial Rotary Screw Air Compressor with 380V/415V/440V small air compressor

Product Description

50HP 37KW OEM Industrial Rotary Screw Air Compressor with 380V/415V/440V

Specification:

Parameter/Model

Displacement/Pressure

Cooling Method

Lubrication volume(L)

Noise db

Driving mode

Voltage

Power

Start up mode

Dimention

Weight

Output pipe diameter

m3/min

KW/HP

L*W*H

ZL-10A

0.9/0.7

0.8/0.8

0.69/1.0

0.6/1.2

air cooling

66±2

direct driving

220V/380V/415V;50Hz/60Hz

7.5/10

y-start-up; varialbe Frequency starting

850*700*920

210

G 1/2″

ZL-20A

2.5/0.7

2.3/0.8

2.1/1.0

1.9/1.2

air cooling

68±2

direct driving

220V/380V/415V;50Hz/60Hz

15/20

y-start-up; varialbe Frequency starting

950*750*1250

300

G 3/4

ZL-30A

3.8/0.7

3.6/0.8

3.2/1.0

2.7/1.2

air cooling

68±2

direct driving

220V/380V/415V;50Hz/60Hz

22/30

y-start-up; varialbe Frequency starting

1380*850*1160

450

G 1″

ZL-50A

6.8/0.7

6.2/0.8

5.6/1.0

5.0/1.2

air cooling

68±2

direct driving

220V/380V/415V;50Hz/60Hz

37/50

y-start-up; varialbe Frequency starting

1550*1000*1330

650

G 1-1/2

ZL-10A-PM

0.9/0.7

0.8/0.8

0.69/1.0

0.6/1.2

air cooling

66±2

direct driving

220V/380V/415V;50Hz/60Hz

7.5/10

y-start-up; varialbe Frequency starting

850*700*820

210

G 1/2″

ZL-20A-PM

2.5/0.7

2.3/0.8

2.1/1.0

1.9/1.2

air cooling

68±2

direct driving

220V/380V/415V;50Hz/60Hz

15/20

y-start-up; varialbe Frequency starting

950*750*1250

300

G 3/4″

ZL-30A-PM

3.8/0.7

3.6/0.8

3.2/1.0

2.7/1.2

air cooling

68±2

direct driving

220V/380V/415V;50Hz/60Hz

22/30

y-start-up; varialbe Frequency starting

1380*850*1160

450

G 1″

ZL-50A-PM

6.8/0.7

6.2/0.8

5.6/1.0

5.0/1.2

air cooling

68±2

direct driving

220V/380V/415V;50Hz/60Hz

37/50

y-start-up; varialbe Frequency starting

1550*1000*1330

650

G 1-1/2″

Intelligent Screw Air Compressor
Ariend with high air flow,low nose ,high relisbility.
The life of the spare parts is long,easy to buy ,lost cost .
Easy maintenanance,save more time.

PRODUCT FEATURES
ENERGY SAVING
Ultra-low frequency speed control technology far surpasses standard VSD compressor systems.
Capable lower than 15Hz operation,this system is truly capable of constant variable pressure operation and significant energy saving.

HIGH RELIABILITY
USoft-Start feature allows for litte or no impact on the power supply system and marginalises mechancial wear and tear up on start-up.
LLeakageis always present in any air system .at full presure a good system can loose 0.2Mpa.CHINAMFG VSD machines can reduce thar loss by up to 25%simply by supplying the air pressure that is required.

MUTE ENVIRONMENTAL PROTECTION
Advanceed Vector variable frequency control reduces vibration and noise.The unit can be used without the requirement for a special room.
This means saving of all resources required to install a machine in an external location such as pipe and power lines and land.Oil exhaust output is lower than 3ppm thus negating enviromantal impact.

ENERGY SAVING 30%&LONGER LIFE
Utilising frequency control for the cooling fan and drive motor allows for up to 30% energy savings.This translates into less frequent servicing of the CHINAMFG thus further significant saving are achieved over the life of the machine.

Why Trust Us ?

Who We A re ?

Tai zhou Mechanical &Electrical Co.Ltd. Is 1 of the main manufactures,specializing in the Research and Development,Manufacturing and sales of the Piston air compressor. Our company located in the CHINAMFG town,LuQiao District, TaiZhou City, far from TaiZhou Airport is only 3KM,and HangZhou port is around 220KM,the traffic is very convenient for your.visiting.
Our company owns an area of 50000 suqare mater and has more than 300 staffs.

We have advanced production equipment and well familiar with the process of the mass production,have high precision measuring instruments and high efficiency of automatic assembly line ensure the quality and quantity of the [roduct. We have strong technical strength and production management ,gathering the technical team and manamement team from the leading enterprise of air compressor in domestic .we set up our town lad and development tesm,with a strong ability to develop thre product ,meeting the diffient demand from the different customer and different ,maket.

We take the maket demand as the guidance ,strives for the survival by quality ,strives for the development by innovation,always put customers,quality and innovation in the first place ,follow up the prefessional management and continuously satisfy the demanded of the customer,We always follow up the principle of people-oriented,legitimate business,honest & trustworthy,focus on the industy of the air compressor,with the effort to create a first-class brand in the industry of air compressor ,with the effort to create a first-class brand in the industry of air compressor.

Our Exhibition

Frequency Asked Question:

Q1: Are you factory or trade company?
A1: We are factory.Thank you.

Q2: What the exactly address of your factory?
A2: Our company located in the CHINAMFG town,LuQiao District, TaiZhou, ZHangZhoug Province, China . Thank you.

Q3: Warranty terms of your air compressor machine?
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the air compressor?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: About 25 working days after receiving the deposit on our bank account

.Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome

Q7:What trad terms do we provide ?
A7:Trade terms FOB,CIF.

Q8:What is our payment term? What kind of settlement currency do we offer ?
A8:Normally, we can do T/T and LC at sight, for the T/T, 30% will be required as deposit, the balance amount against the copy of the BL.
We can accept the currency in USD or RMB.

Q9:What about the cost of sample?
A9: The cost of the sample will be required, but we can return back the amount in the future order by 1*40’HQ.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	12 Months
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Samples:	US$ 20000/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What are the advantages of using an air compressor in construction?

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

air compressor

How are air compressors employed in the mining industry?

Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:

1. Exploration and Drilling:

Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.

2. Ventilation and Air Quality Control:

Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.

3. Material Conveyance:

In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.

4. Dust Suppression:

Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.

5. Instrumentation and Control:

Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.

6. Explosive Applications:

In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.

7. Maintenance and Repair:

Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.

It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.

By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.

air compressor

In which industries are air compressors widely used?

Air compressors find extensive usage across various industries due to their versatility and ability to generate compressed air. Here are some industries where air compressors are widely employed:

China best 50HP 37kw OEM Industrial Rotary Screw Air Compressor with 380V/415V/440V small air compressor
editor by CX 2024-02-14